Senseca ECO 130.2 handleiding
Handleiding
Je bekijkt pagina 10 van 22
ECO 130.2 - Quick response 2 channel-alarm-thermometer
Operation
B-H89.0.1X.DK2-2.1 Page 10 of 22
Parameter
Values
Meaning
OFF
Backlight deactivated
0:15, 0:30, 1:00, 2:00,
4:00
Automatic shut-off of the backlight after a select-ed
time in minutes:seconds, during which no buttons
have been pressed
ON
No automatic shut off of the backlight
UN,T
Display unit
°(
Temperature display in °C
°F
Temperature display in °F
IN,T
Factory settings
NO
Use current configuration
YES
Reset device to factory settings.
After confirming with the function-button, the
display shows: IN,T DONE
*1 = The alarm function works depending on the set measuring channel:
with INP = „(H.1“ on channel 1
with INP = „BOTH“ on channel 1 and channel 2
with INP = „D,FF“ on the difference temperature
Note to D,FF
The adjustable alarm limits continue to refer to the measuring range limits of the device,
which means: negative values can only be set to a very limited extent!
if necessary, swapping channel 1 and channel 2 could help here
Bekijk gratis de handleiding van Senseca ECO 130.2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | ECO 130.2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2204 MB |
