Senseca ECO 121-H handleiding
Handleiding
Je bekijkt pagina 16 van 22
ECO 121-H - HACCP alarm thermometer
Operation and maintenance
B-H86.0.0Y.DK2-4.1 Page 16 of 22
Note
Unnecessary unscrewing endangers the protection against moisture and should therefore
be avoided.
Read the following handling instructions before replacing batteries and follow them step
by step.
If disregarded, the device could be damaged or the protection from moisture could be
diminished.
1 Unscrews the Phillips screws (A)and remove the cover.
2 Carefully replace the two Mignon AA batteries (B). Ensure
that the polarity is correct! It must be possible to insert the
batteries in the correct position without using force.
3 The O-ring (C) must be undamaged, clean and positioned at
the intended depth.
4 Fit the cover (D) on evenly. The O-ring must remain at the
intended depth!
5 Tighten the Phillips screws (A).
Bekijk gratis de handleiding van Senseca ECO 121-H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Senseca |
| Model | ECO 121-H |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2225 MB |
