Handleiding
Je bekijkt pagina 7 van 68
EN – 6
Setting the Clock
1. In Standby mode, press and hold the button for 2 s or enter MENU and select System>Time.
2. In this menu you can:
Set Time/Date: set the current time and date.
Auto update: detect time from DAB or FM broadcasts or disable time update.
Set time mode 12/24 hours
Set date format: DD-MM-YYYY/ MM-DD-YYYY
Setting the Alarm
The time must be set before the alarm can be used. There are two independent alarms.
1. Enter the MENU and select System> Alarm. Or press the
button for 2 seconds in Standby.
2. In the alarm menu, select between Alarm 1 and Alarm 2.
3. Next, set the
● Ontime:wake-uptime
● Duration:15,30,45,60,90
● Source:Buzzer,DAB,FM,CD,USB
● Frequency:Daily/Once/Weekends/Weekdays
● Date:MM-DD-YYYY(onlyfor“once”)
● Volume
● Alarm:On/Off
4. Save the values by pressing OK.
5. Press STOP or MENU to exit the alarm settings.
6. Press the
button repeatedly to switch alarms 1 and 2 on or off.
The status is shown by an icon on the display. You can also use this in STANDBYmode.
Once the alarm is triggered, you can turn it off by pressing
or . And by pressing the Snooze button
, you activate a delayed (repeated) wake-up in 9 minutes. It will appear on the display. When you
switch on the device, this delayed wake-up is cancelled.
If CD or USB is selected as the wake-up sound source and you do not insert a data medium, the wake-
up will use the buzzer sound itself. If you select FM or DAB as the source, tune to the desired station in
advance.
Sleep Timer
The device can automatically switch off to STANDBY after a set time.
With the device switched on, enter MENU and select System/Sleep. Select from: Off, 15, 30, 45, 60, 90
minutes and confirm with OK. Exit the settings.
FM RADIO
Note: To listen to the radio, always pull out the telescopic antenna and pull down it when you are finished
and put it back in place.
You can find and receive FM radio stations in several ways.
Quickly find and listen to a strong station – in FM mode, press TUNE +/- for 2 seconds, the search will
be displayed in that direction and will stop when a strong station is found. If the station does not suit you,
repeat this procedure to find the next station.
In some difficult conditions, poor reception can be improved by rotating the antenna, bringing the receiver
out from behind a building or natural screen, and also by briefly pressing TUNE +/-, which changes the
received frequency by 0.05 MHz.
Scan the entire band – you can search and save up to 40 stations by pressing the OK/SCANbutton. The
found stations are saved in the pre-sets and the first one starts playing after the search is finished.
Bekijk gratis de handleiding van Sencor SPT 7500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sencor |
| Model | SPT 7500 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 7174 MB |
