Handleiding
Je bekijkt pagina 12 van 80
EN – 11
5. Repeat the above steps to programme additional tracks. A maximum of 20 CD tracks / 99 MP3 tracks
can be programmed.
6. Press the button to start programme playback in your preferred order.
7. You can press the button to end the programme playback.
8. To delete a programme, press the button twice in stopped mode or open the CD drive door.
USB PLAYBACK
1. Press the MODE button repeatedly to select USB.
2. Press to start playback. Press this button again to STOP music playback; the flashing of the track
time on the display indicates the player's pause mode. Press the button to resume playback.
3. To stop playback, press the button.
4.
The control procedure is the same as for playing CDs. See the general description of the control for
details.
Caution:
Due to the variety of devices on the market, compatibility and playback support for all media are not
guaranteed. The memory devices you want to connect should be tested in advance and/or formatted as
FAT32. The playback of protected media, files or content stored inside them may fail.
EXTERNAL INPUT (AUX)
Press the MODE button repeatedly to select AUX. The device is equipped with a 3.5mm audio jack.
Connect your device to the SPT 6200DB using an audio cable. First connect the audio connector to your
device and then to the jack on the SPT 6200DB located on the right side.
Warning:
Before connecting your device to the SPT 6200DB receiver, ensure that the output signal from your
device is at its minimum level (minimum output volume). This will prevent damage to the SPT 6200DB
radio.
GENERAL SETTINGS
In standby mode, press and hold the Menu button for 2 seconds to adjust the settings:
• [Backlight]: Setting the time interval and brightness level
• [Time/Date]: Setting time and date entries
• [Language]: English, Francais (French), Deutsch (German), Norsk (Norwegian), Polski (Polish),
Espanol (Spanish), Svenska (Swedish), Netherlands (Dutch), Portugues (Portuguese).
• [Factory Reset]: Resetting the product to factory default settings.
• [System version]: Software version check.
SETTING THE SLEEP TIMER
This device can be set to automatically switch to standby mode after a preset time.
When the unit is switched on, press and hold the MENU button for 2 seconds to open the menu, then
select [SLEEP] and press the OK button to open.
Bekijk gratis de handleiding van Sencor SPT 6200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sencor |
| Model | SPT 6200 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 8962 MB |
