Sekonic RT-BR handleiding
Handleiding
Je bekijkt pagina 6 van 49
v
NOTE
● The operation of this product may change without prior notice due to specication
changes or other reasons. Therefore, the contents of this operating manual may differ
from actual operation of the product.
URL: https://www.sekonic.com/support/downloads
● The safety-related precautions such as "Safety Guide and Maintenance" and "Safety
Precautions" conform to the legal and industry standards that were applicable at the time
this operating manual was created. Therefore, this manual may not contain the latest
information. If you are using the previous operating manual, please download and refer
to the latest operating manual.
● Before using this product, please read this "Safety Precautions" for proper operation.
● The product may contain printing materials such as cautions related to safety and/or
printing errors as a supplement to the operating manual.
● The contents of this operating manual may be reproduced for non-commercial purposes
and for personal use only. However, the reproduced material must contain the copyright
notice of our company.
● The screens in this operating manual may differ from the actual displays of the product
you are using. (Colors, letters, etc.)
■
Accompanying Accessories
The following items are included with the Transmitter RT-BR. Please be sure to check that
all noted items are included.
If any items are missing, please contact the distributor or the reseller you purchased the
transmitter from.
Transmitter broncolor Startup Guide Safety Precaution
Safety Precaution
For Proper Operation
Before using this product, please read this "Safety Precautions" for
proper operation.
WARNING
The WARNING symbol indicates the
possibility of death or serious injury if the
product is not used properly.
CAUTION
The CAUTION symbol indicates the
possibility of minor to moderate personal
injury or product damage if the product is
not used properly.
NOTICE
The NOTICE symbol indicates cautions
or restrictions when using the product.
Please read all notes to avoid errors in
operation.
General Safety Information
• Read the Operating Manual before use.
• Keep the Operating Manual on hand for reference at any
time.
• Stop using this product when there are any abnormalities.
• The modication or disassembly of this product is prohibited.
• Do not attempt to repair this product by yourself.
• This product is intended only for persons with expert
knowledge.
• Monitor children so that they do not touch this product.
• Use this product in a usage environment described in the
Operating Manual.
• This product is not waterproof.
WARNING
There is a danger of electrical shock when using high
voltage strobes.
Avoid contacting the terminals.
This product emits electromagnetic waves.
Do not bring this product close to persons with
pacemakers.
Do not use this product in an explosive atmosphere.
Use of devices emitting electromagnetic waves is
prohibited in hospitals.
CAUTION
• Check the material of the neck strap to see if there is any
risk of allergy.
• Be careful of sudden emission of lights from strobes.
NOTICE
• Do not leave this product on car dashboards in hot weather.
This may damage the product.
• Remove the batteries when this product is not in use for a
long period of time.
• When the desired performance is not achieved, stop using
this product and contact the service center.
Information for Users on Collection and
Disposal of Old Equipment
To protect environment, do not through this device
and batteries away with the normal household waste
at the end of those life, but bring them in at an
ofcial collection point of your country for recycling.
English
English
The steps for installing the transmitter module and meter setup are common
for RT-20PW/RT-3PW (PocketWizard
®
), RT-BR (broncolor
®
), RT-EL/PX
(Elinchrom
®
, Phottix
®
) and RT-GX (Godox
®
) transmitters.
Before installing the transmitter, please read the operating manuals for
the meter and transmitter as well as the safety precautions so that you will
fully understand the features and operation of this product. Then keep the
manuals and this Startup Guide in a safe place for future use.
Displays in this start up guide is for explanation purpose. Content to be
displayed diers depending on which transmitter is installed.
1. Downloading Manuals
Please visit www.sekonic.com to download the latest
version of meter and transmitter operating manual.
Use the URL below for direct access.
URL : https://www.sekonic.com/support/downloads
2. Installing the Transmitter
1) Turn OFF the meter.
2) Unlatch and remove the Battery
cover.
3) Remove the Transmitter connector
cover.
4) Align the connector pins with those
of the transmitter module and insert the Transmitter.
* Be sure to reattach the connector cover if the Transmitter is removed.
5) Insert the Battery cover tabs (three) into the receiving holes in the
meter body, press the cover down and latch it closed.
3.
Setting Radio System Preference
(for RT-20PW, RT-3PW and RT-EL/PX only)
Use the Custom Setting in Menu to set the
Radio System Preference for the ash system
in use.
RT-20PW/RT-3PW: ControlTL, Standard or
both
RT-EL/PX: Elinchrom Normal/Speed mode or
Phottix Strato
II
4.
Selecting Measuring Mode
Touch the icon to enter the Measuring Mode
Selection screen.
①
Radio Triggering Flash Mode
Detects ash brightness after Measuring button is
pressed to send radio transmitted signal to radio
receiver connected to ash. Displays F-stop value.
②
Radio Triggering Multi Flash Mode
Detects and accumulates ash brightness after
Measuring button is pressed to send radio
transmitted signal to radio receiver connected to
ash. Displays F-stop value.
③
HSS Flash Radio Triggering Mode (for RT-GX only)
Detects ash brightness after Measuring Button is
pressed to send radio transmitted signal to radio
receiver connected to ash. Displays F-stop value.
④
Flash Duration Analysis Radio Triggering Mode
Detects ash brightness after Measuring button is
pressed to send radio transmitted signal to radio
receiver connected to ash. Displays F-stop value
and ash duration time.
5.
Setting Channel (Studio) and Zone/Group (Lamp)
Use Tool Box screen to set the meter (transmitter)
to the same channel (studio) and zone(s) / group(s)
(lamp) as the receivers.
In addition, set the wireless ID when using RT-GX
.
* For details, see the operating manuals for
transmitter.
Transmitter
RT-20PW (344MHz)
,
RT-3PW (433MHz)
RT-BR
(2.4GHz)
,
RT-EL/PX (2.4GHz)
RT-GX (2.4GHz)
Startup Guide
Example of RT-GX
[Measuring screen]
[Measuring Mode
Selection screen]
[Tool Box screen]
RT-20PW
RT-3PW
RT-EL/PX
[Radio System Preference screen]
①
②
③
④
Bekijk gratis de handleiding van Sekonic RT-BR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sekonic |
| Model | RT-BR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5250 MB |