SEIKI SC-1300AU6DSS handleiding
Handleiding
Je bekijkt pagina 19 van 44
19
Connect the Drain Hose
If the end of the drain hose does not match the kitchen drain pipe, please use a
heat-resistant and detergent-resistant drain extension (not provided). These are
available from local pipeline suppliers.
Connect the sewer pipe
Please check the sewer pipe during the first installation. If the sewer pipe under
the sink cannot discharge water normally, E2 error may occur.
CAUTION
Carefully pass the drain hose through the hole on the cabinet. The hole on the
cabinet may have sharp edges, which will damage the hose. Sharp edges should
be filed down to ensure that they do not damage the drain or inlet pipe.
One of the following methods can be used to prevent siphon effect:
1. When the drain hose is connected to the sewer pipe, it must be arched upward
and fixed on the lower surface of the kitchen table.
2. When the drain hose is connected to a separate riser 1, it must be ensured that
the connector 2 is air tight. Otherwise, it may cause odor leakage.
The riser diameter shall be at least 40mm.
INSTALLATION (Cont.)
Bekijk gratis de handleiding van SEIKI SC-1300AU6DSS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | SEIKI |
| Model | SC-1300AU6DSS |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 3622 MB |