Sealer Sales FRM-1120C handleiding
Handleiding
Je bekijkt pagina 25 van 63
FRM- 1120C INSTRUCTION MANUAL
20
Sealer Sales | www.sealersales.com | Tel: 818-718-8818 | E-mail: contact@sealersales.com
Printing Operation - FRS-1120W
FRS-112W is equipped with a hot stamp ribbon printer. The printer works much like an analog printing press.
Types are loaded into the imprinter then heated. An inked printing ribbon sits between the type and material
to be printed. The heated type presses onto the ribbon, melting the ink onto the material. A spring biased
dancer assembly having a idler roller maintains a tension on the inked print ribbon as the inked print ribbon is
transferred from a supply reel to a rewind reel. To change the code of the hot stamp, types can be easily
replaced.
Figure 24. Type Example - FRS-1120W
1. Determining the correct position for printing on your bag will require some trial and error. Adjust
the Speed, Coarse Tuning, and Fine Tuning knobs to determine the optimal printing location on
your bag.
Figure 25. FRS-1120W Control Panel
2. To install the hot stamp ribbon, web the imprinter per diagram below (Figure 26). Be sure that
the dull side (pigment) of the tape faces away from printing head and toward the base of the
imprinter. To web the ribbon through the ribbon press wheel, pull the handle upwards to release
the ribbon press wheel. Lock the ribbon to the collect wheel by using a piece of scotch tape to
adhere the ribbon to the collect wheel.
Each number dial turn moves the print
approximately 1” – 1½” to the right
Each number dial turn moves the
print approximately 1/8” to the right
Bekijk gratis de handleiding van Sealer Sales FRM-1120C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sealer Sales |
| Model | FRM-1120C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 19569 MB |
