Sealer Sales CS-6050 handleiding
Handleiding
Je bekijkt pagina 17 van 34
13
6. Machine Maintenance
Warning！Danger of electric shock!
The power must be completely disconnected before servicing the machine.
In order to extend the life of the machine, prevent malfunctions, and achieve optimal
packaging results, routine maintenance of the machine is a must. If the machine is used
frequently (more than 4 hours a day), then it is recommended to carry out professional
maintenance every six months, and if it does not exceed 4 hours per day, a complete
maintenance once every year (depending on location, environment and product).
However, some small maintenance work that the user can be responsible for, must be carried out
frequently. The following is an overview of these activities.
Complete power outage before maintenance.
If the machine is not running properly or making a lot of strange noises, please turn off the
power immediately and contact the manufacturer or supplier.
Non-professionals are not allowed to carry out the major maintenance work.
If the user fails to maintain the machine according to the instructions in this manual,
resulting in the failure or damage of the machine, the manufacturer will not assume the
relevant responsibilities.
6.1 Standard maintenance schedule
Time
Maintain Content
Every Day
Pay attention to cleaning the cutting blade residue after the machine
is used up.
Every Week
Screws and gears are lubricated every week.
Every Two Months
Lubricate the various transmission parts on the sealing head every
two months.
Check all the screws and nuts every two months. If it is loose, tighten
it in time.
Every Six Months
Change the cutting blade at least once every six months.
Every Year
Replace the toothed conveyor belt.
6.2 Routine maintenance
Keep the inside and outside of the machine clean and dry at all times.
Do not place wet or dirty objects on the machine table.
The power cord should be kept from rolling and should be wound when not in use.
Turn off the power before repairing and adjusting the unit.
The blade must be cleaned and lubricated before use.
Bekijk gratis de handleiding van Sealer Sales CS-6050, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sealer Sales |
| Model | CS-6050 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4848 MB |
