Sealer Sales CS-6050 handleiding
Handleiding
Je bekijkt pagina 14 van 34
10
5. Startup and operation
Be careful! Danger of injury!
Please operate the machine against the manual.
Be careful！Danger of getting hurt due to mechanical components！
Be careful of the blade to cut the tape!
Be careful of getting clamped by driving gears.
If you have any questions about the operation and function of the machine, please contact
the manufacturer or supplier if the instructions do not provide relevant information.
If the machine is not operating properly or makes strange noises, please turn off the power
immediately, stop the machine and turn off the power.
In the event of a malfunction, please contact the manufacturer or supplier.
5.1 Tape feeding
Secure the tape roll on the tape roller before turning on the machine.
Pull out the tape by passing the copper roller, then the tension roller, the copper wheel, and
finally the pressing plate and the front rubber wheel.
Note: The sticky side should face outward.
Fig 5-1 Tape feeding route
Bekijk gratis de handleiding van Sealer Sales CS-6050, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sealer Sales |
| Model | CS-6050 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4848 MB |
