Sealer Sales CBS-880II handleiding
Handleiding
Je bekijkt pagina 31 van 56
CBS- 880 INSTRUCTION MANUAL
27
Maintenance
The following maintenance procedures should be followed to ensure the longevity of your CBS-880 band sealer.
Always disconnect sealer from power source before servicing, changing accessories or cleaning the unit.
Inspection and Cleaning
1. Inspect your machine daily. Daily maintenance is necessary to lengthen the life of the machine and to
achieve the best seal. If the machine is frequently used (more than four hours/day), it is suggested you
service the machine at least every three months. If the machine is used less than four hours/day, it is
advisable to service every six months. Please make adjustments as necessary for your machine.
2. Check if there is any foreign matter or dirt adhering to the band sealer.
3. To clean your band sealer, wipe down your sealer with silicone spray and a shop cloth. Do not apply
silicone directly to your sealer. Definitely DO NOT wash down your machine with water.
Maintenance Schedule
Refer to the below maintenance schedule for your band sealer.
Schedule Maintenance
Daily
1. Use a brush to remove any substance that is attached to the sealing or guide belts
2. Use a shop cloth and silicone to clean the conveyor belt
Monthly
1. Check the condition of the sealing belt. Replace if needed.
2. Check the condition of the drive belt. Replace if needed.
3. Clean the motor carbon brush
6 Months 1. Check the condition of the motor brush. Replace if needed.
2. Add lubricating grease to the gears.
Yearly
1. Check all above items
2. Check the condition of the rubber wheel. Replace if needed.
3. Check the temperature controller. If the set temperature is no reached within ten minutes, you
should change the temperature controller.
4. Check the electronic parts such as the emergency stop, buttons, potentiometer, and fan. If parts
are not working properly, replace if needed.
5. Check and add lubricating greas to the transmission parts including gears, shafts and joints. If
there are any worn parts, replace as needed.
6. Clean the turbocase and change the oil in it.
WARNING!
Disconnect the machine from power before any maintenance
Bekijk gratis de handleiding van Sealer Sales CBS-880II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sealer Sales |
| Model | CBS-880II |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18334 MB |
