Sealer Sales CBS-880II handleiding
Handleiding
Je bekijkt pagina 18 van 56
CBS- 880 INSTRUCTION MANUAL
14
Operation Set-up
1. Our machines are equipped with a three-prong grounded plug. Make sure the plug is well-connected in
the socket to ensure safe operation.
a. Check that the power supply voltage is consistent with the voltage of the machine
b. Ensure the machine is properly connected to a grounded receptacle. (grounding line is yellow
green double color line)
c. Make sure there is nothing impeding movement of the cable. If the cable appears damaged,
replace immediately
2. First time operation. Allow the machine to pre-heat by running at a low temperature for a few minutes.
This would apply if the machine has not been in operation for a long time. The machine can sometimes
be damp from storage or shipment and running at a low temperature will dry out any residual moisture.
3. Make sure the circuit breaker is in the “ON” position. (Levers pointing up)
4. To adjust the conveyor position forwards or backwards. Refer to Figure 7 for knob adjustments.
Figure 7. Adjusting conveyor forward or backwards
WARNING!
Ensure that the socket has protective grounding wires
Please check the voltage by referring to machine nameplate
Please comply with safety guidelines
Bekijk gratis de handleiding van Sealer Sales CBS-880II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sealer Sales |
| Model | CBS-880II |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18334 MB |
