Sealer Sales CBS-880II handleiding
Handleiding
Je bekijkt pagina 17 van 56
CBS- 880 INSTRUCTION MANUAL
13
1. Loosen the knobs for the conveyor table to move the conveyor table forward.
Figure 4. Two flower shaped knobs are found under conveyor.
2. Loosen the screw on the drive shaft and insert the conveyor middle post (found on the conveyor table)
to the drive shaft. Be sure the groove on the conveyor middle post lines up along the screw on the drive
shaft. Move the conveyor belt as needed to allow the conveyor middle post to meet with the drive shaft.
Once the conveyor middle post is in place, tighten the screw on the drive shaft to lock the conveyor
middle post in place.
Figure 5. Insert the conveyor middle post in drive shaft. Make sure
grooves are aligned.
Figure 6. Tighten the screw on the drive shaft to lock the conveyor middle post
in place.
3. Tighten the round nut (Figure 37, Item #18) along the drive shaft as well as the knobs and in front of
the band sealer (Figure 43, Item #12). The drive shaft can be moved up or down by adjusting the round
nut using the special tool found in the spare parts kit.
Bekijk gratis de handleiding van Sealer Sales CBS-880II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sealer Sales |
| Model | CBS-880II |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18334 MB |
