Seagate Exos AP 4U100 handleiding
Handleiding
Je bekijkt pagina 10 van 30
10Chapter 1 Introduction
Command prefix Applicability Target component Example
-
Exos/Nytro E and AP Partner IOM GEM instance
-ver
+
Exos/Nytro AP Local GEMSat instance
+ver
%
Exos/Nytro AP Partner GEMSat instance
%ver
Limitations
The command line length is limited to a maximum of 120 characters.
Commands overview
This section introduces the command categories that will contain the respective commands that will be presented in the guide.
The presentation of command content will also be reviewed. This section contains the following topics:
l
Command categories
l
User Command sub-categories
l
Engineering command sub-categories
l
Testing command sub-categories
l
Command content and presentation
Command categories
The table below identifies and describes the command types contained in the guide.
Command type Description
User Commands that are accessible by user-level accounts. These include commands that pertain to essential
enclosure control and status, and diagnostic collection.
Testing Commands used for test purposes. They induce or simulate fault conditions in the enclosure.
Engineering Commands for use by Seagate Engineering personnel.
The table below identifies and describes the User, Testing, and Engineering command sub-categories contained in the guide.
Cable management These commands are used to manage data-path host port cables.
Canister management These commands are used to access status for or control the enclosure I/O modules.
CLI in-built These commands are basic to any system that uses GEM.
Drive management
These commands are related to managing the enclosure drive bays.
Environmental control These commands are related to environmental controls.
GEMNet
These commands are used to access remote GEMLite nodes.
Human Interface Device
(HID)
These commands control the general enclosure and operations panel indicators.
IPMI system
These commands are only available on products with a baseboard management controller (BMC)
managing an application processor domain.
Logging
These commands manage the enclosure error logs.
Network
These commands available on canisters that support direct Ethernet connections to GEM.
SAS
These commands are used to query and control SAS protocol and hardware related functionality.
Bekijk gratis de handleiding van Seagate Exos AP 4U100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Seagate |
| Model | Exos AP 4U100 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2385 MB |
