Scotsman Prodigy Elite MC1848 handleiding

Niet gecategoriseerd

Scotsman

20 pagina's

PDF beschikbaar

Handleiding

MC1448 and MC1848

Air and Water Cooled User Manual

June 2022

Page 8

Uncrate and Set Up

Begin with unpacking the ice storage bin. Remove the

carton, and using part of the carton as a cushion, tip

the bin on its back to remove the skid and attach the

legs or casters.

Note: Turn the leg levelers in all the way and adjust

after the ice machine is on top and in its selected

location.

Return the bin to an upright position. Check the bin

top gasket for gaps and tears, ll any in with food

grade sealant prior to placing the ice machine on the

bin.

Install the bin top adapter if one is required for the

application.

If the ice machine has not been unpacked, do so now.

Remove the carton from the skid. Lift the ice machine

o󰀨 the skid directly onto the bin.

Note: The machine is heavy! Use a mechanical hoist

if necessary.

Secure the ice machine to the bin with the hardware

provided (two metal straps and 4 bolts).

Place the bin and ice machine in the selected location

and level it by adjusting the bin leg levelers.

Remove the white plastic covering the panels.

Bin Recycling

Many times an ice machine head will be replaced,

while the existing ice storage bin will be reused. This

is an acceptable practice, if some precautions are

taken:

• The used bin must be in good condition. Broken

doors, hinges, or warped walls are reason for

considering a new bin.

• The used bin top edge gasket must be replaced.

Water leaks could occur if the gasket tape is not

replaced.

• The used bin should be the proper size for the ice

machine head.

Lower Light and Switch Panel

This user accessible panel provides important

operational information and duplicates the lights and

switches on the controller. It also allows access to the

On and O󰀨 buttons that operate the ice machine.

Sometimes access to the switches should be limited

to prevent unauthorized operation. For that purpose a

xed panel is shipped in the hardware package. The

xed panel cannot be opened.

To install the xed panel:

1. Remove the front panel.

2. From the back side of the panel, slide the door

to left while spreading the clips to remove the

original door from the bezel.

3. Slide the xed panel into bezel until it snaps into

place.

4. Reinstall front panel.

Open door to access On

and O󰀨 switch buttons.

Switch Door

Bekijk gratis de handleiding van Scotsman Prodigy Elite MC1848, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.