Scotsman Prodigy Elite MC1848 handleiding

Niet gecategoriseerd

Scotsman

20 pagina's

PDF beschikbaar

Handleiding

MC1448 and MC1848

Air and Water Cooled User Manual

June 2022

Page 10

Electrical

The machine is not supplied with a power cord, the

machine should be hard-wired.

The dataplate on the back of the cabinet details

the power requirements, including voltage, phase,

minimum circuit ampacity and maximum fuse size.

HACR type circuit breakers may be used in place of

fuses. Extension cords are not permitted. Use of a

licensed electrician is recommended.

Electrical connections are made inside the junction

box in the back panel of the ice machine.

1. Remove the junction box cover and route the

power cord through the access hole and properly

attach the power supply wires to the leads in the

junction box.

2. Install a eld supplied strain relief per code.

3. Attach a ground wire to the ground connection in

the junction box.

4. Check voltage when complete.

5. Return the junction box cover to its original

position and secure with the original screws.

Follow all applicable local, state and national codes.

Power

Supply

Wires

Ground

Wire

Connection

Install

Strain

Relief

Electrical Connections, Back of Unit

Cutaway View of Water Reservoir

Air Vent at Water Inlet Connection

Maximum Water Level in Reservoir

The air break is created by the gap between the

maximum water level in the reservoir (additional water

will spill out) and the water inlet connection. Reservoir

water cannot contact the water inlet connection and

in case of negative pressure, only air can enter the

water supply hose.

Air Break

Bekijk gratis de handleiding van Scotsman Prodigy Elite MC1848, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.