Scosche GM1504B handleiding
Handleiding
Je bekijkt pagina 11 van 48
Read pages 3-6
for kit assembly.
"B2" BRACKET USE HOLE #2
"B2" SOPORTE USA ABERTURA NO. 2
CUT OFF TAB
CORTA EL
LENGUETE
TOP
TOPE
FRONT OF KIT
FRENTE DE ESTUCHE
Read pages 3-6
for kit assembly.
FRONT OF KIT
FRENTE DE
ESTUCHE
"A2" BRACKET USE HOLE #1
"A2" SOPORTE USA ABERTURA NO. 1
"D2" BRACKET
USE HOLE #1
"D2" SOPORTE USA ABERTURA NO. 1
Read pages 3-6
for kit assembly.
2171
RIGHT
BRACKET
SOPORTE
DERECHO
2171
2171 LEFT BRACKET
SOPORTE IZQUIERDA
2171
USE HOLE #2
USA ABERTURA NO. 2
USE HOLE #2
USA ABERTURA NO. 2
USE HOLE #8
USA ABERTURA
NO. 8
USE HOLE #8
USA ABERTURA
NO. 8
11
1986-91 Cadillac Eldorado
1986-91 Cadillac Seville
RADIO REMOVAL:
1. Gently pry on the edges of the vent trim piece located above
the radio. Release the snaps and remove the trim piece.
2. Remove the three screws from above the radio.
3. Extract the three screws from the dash panel
trim piece above the instrument cluster.
4. Gently pry out the driver’s side air vent
in the dash trim to access the single screw
which secures the left side of the trim panel.
Remove the screw and the trim panel.
5. Loosen the two bolts which secure the radio
to the dash. Slide the radio out of the cavity.
Disconnect the antenna, speakers, all the electrical
connections and remove the radio.
USE THE SHADED BRACKETS & THE INDICATED HOLE LOCATIONS. CUT OFF THE REMAINING BRACKETS & DISCARD.
Usa los soportes asombrados y las localizaciónes de aberturas indicadas. Corta los soportes que sobran y desechalas.
1984-85 Cadillac Eldorado
1984-85 Cadillac Seville
RADIO REMOVAL:
1. Remove the two screws from the top of the radio
trim panel and remove the trim panel.
2. Remove the two screws securing the
radio bracket to the dash, then pull
the radio out of the cavity.
3. Disconnect the antenna,
speakers and all the
electrical connections,
then remove the radio.
USE THE SHADED BRACKETS & THE INDICATED HOLE LOCATIONS. CUT OFF THE REMAINING BRACKETS & DISCARD.
Usa los soportes asombrados y las localizaciónes de aberturas indicadas. Corta los soportes que sobran y desechalas.
2002 Cadillac Escalade EXT
1999-02 Cadillac Escalade
2001-02 Chevrolet Avalanche
1995-99 Chevrolet Crew Cab Dually Pickup
1995-02 Chevrolet Pickup - Full Size
1995-02 Chevrolet Suburban 1995-02 GMC Pickup - Full Size
1995-02 Chevrolet Tahoe 1995-01 GMC Suburban
1995-00 GMC Crew Cab 2002 GMC Yukon XL
Dually Pickup 1995-02 GMC Yukon
RADIO REMOVAL:
1. Engage parking brake.
2. Place key in ignition and
depress brake to shift
vehicle into lowest gear.
This will allow the gear
shift to be out of the way.
3. Carefully pull out on
dash instrument / radio dash bezel
to release spring clips, unplug connectors and remove panel.
4. Compress the two plastic side radio mounting
clips, slide radio out of dash, unplug connectors and remove radio.
NOTE: We recommended that you use the Scosche GM02 factory connector
and the MDA-1 antenna adapter to eliminate the need to cut any of the factory plugs.
USE THE INDICATED BRACKETS AND HOLE LOCATIONS. SEE PAGE 4.
Usa los soportes y localizaciónes de aberturas indicadas. Vea la página 4.
Bekijk gratis de handleiding van Scosche GM1504B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scosche |
| Model | GM1504B |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7164 MB |
