SchwankAir AC-KE36-60 handleiding
Handleiding
Je bekijkt pagina 20 van 33
schwankgroup.com/schwankair
Replacing heating elements/heating
package (TE)
1. Mark and disconnect the cables to the heating
elements/package.
2. Remove the mounting screws securing the
heating elements/package in the unit and lift
the heating elements/package out.
3. Install the new heating elements/package in
reverse order to the above.
Replacing motor or impeller
1. Remove the front.
2. Remove gable end.
3. Remove the screw between motor and fan.
4. Disconnect the cables to the motor.
5. Remove the screws securing the motor and lift it
out together with the impeller.
6. Install the new motor and/or the new impeller
as above in reverse order.
Troubleshooting
If the fans are not running or do not perform
properly, check the following:
• The functions and settings of the built-in control
system.
• That the intake grille/filter is not dirty.
If there is no heat, check the following:
• The functions, internal sensor and settings of
the built-in control system.
Temperature control
See control pages.
For units with electrical heating, also check the
following:
• Power supply to electric heater coil; check
fuses and circuit-breaker (if any).
• That the overheat protection has not been
deployed.
If the fault cannot be rectified, please contact a
qualified service technician.
Residual current circuit breaker (TE)
When the installation is protected by means of a
residual current circuit breaker, which trips when
the appliance is connected, this may be due
to moisture in the heating element. When an
appliance containing a heater element has not
been used for a long period or stored in a damp
environment, moisture can enter the element.
This should not be seen as a fault, but is simply
rectified by connecting the appliance to the
main supply via a socket without a safety cut-out
so that the moisture can be eliminated from the
element. The drying time can vary from a few
hours to a few days. As a preventive measure, the
unit should occasionally be run for a short time
when it is not being used for extended periods of
time.
Handling of product at end of working life
This product may contain substances necessary
for the functionality of the product but potentially
dangerous for the environment. The product
should not be disposed of mixed with general
household waste but delivered to a designated
collection point for environmental recycling.
Please contact the local authority for further
details of your nearest designated collection
point.
Packaging
Packaging materials are chosen with
consideration to the environment and are
therefore recyclable.
Bekijk gratis de handleiding van SchwankAir AC-KE36-60, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | SchwankAir |
| Model | AC-KE36-60 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5149 MB |