Scheppach VC30 Premium handleiding
Handleiding
Je bekijkt pagina 24 van 96
3. Fit the hose coupling (12a) to the blowing connection
(10) (see 8.5.2).
Connect a nozzle (19/20) if required (see 8.9.2).
4. Hold the suction pipe (12) handle (13) firmly.
5. Switch on the product (see 9.1).
6. Blow off a surface or objects.
7. Switch off the product (see 9.1).
8. Connect the suction hose to the suction connection
(6) (see 8.5.1).
11 Cleaning and maintenance
WARNING
Have maintenance and repair tasks that are
not described in this operating manual, car-
ried out by a specialist workshop. Use only
original spare parts.
There is a risk of accident! Always carry out
maintenance and cleaning work with the mo-
tor switched off and the mains plug discon-
nected. There is a danger of injury! Let the
Product cool down before all maintenance and
cleaning tasks. Elements of the engine are
hot. There is a danger of injury and burning!
The product can start unexpectedly and cause injuries.
– Switch off the motor before carrying out any clean-
ing or maintenance work.
– Allow the motor to cool down.
– Pull out the mains plug!
11.1 Cleaning
11.1.1 Emptying the container (3) (Fig.1)
WARNING
Empty and clean the product before and after
use to avoid the accumulation of materials
that could pose a fire risk in the product.
1. Remove the container cover (2) from the container (3)
as described in 8.1.
2. Empty the container (3).
11.1.2 Empty the container (3) after wet
vacuuming (Fig.1,14)
1. When wet dirt is present, open the drain cap (6) to al-
low the liquid sucked up to drain.
2. Lift the product by the handle (1) and tilt it slightly to
pour liquid residues out of the container (3).
3. Put the drain cover (6) back on the drain hole. Close it
by turning the drain cover (6) clockwise.
4. To ensure that the container (3) is empty, proceed as
described in 11.1.1.
11.1.3 Cleaning the foam filter (22) and filter
cartridge (23) (Fig.1,7,8)
Clean the foam filter (22) or the filter cartridge (23) if the
suction power decreases.
Note:
Before installing the filter again, make sure that it is dry.
1. Remove all nozzles (16/17/19/20) and the telescopic
pipe (14) from the holder (2a/4b).
2. Take off the container cover (2) as described in 8.1.
3. Flip the container cover (2).
4. Pull the foam filter (22) or the filter cartridge (23) off
the filter cage (11).
5. Remove the dust from the foam filter (22) or the filter
cartridge (23) by shaking it out or washing it out if nec-
essary.
6. Allow the foam filter (22) or the filter cartridge (23) to
air dry before attaching and using it again.
7. Reattach the foam filter (22) or the filter cartridge (23)
to the filter cage (11).
8. Close the container (3) with the container cover (2).
11.2 Maintenance
1. Check the product for obvious defects such as loose,
worn or damaged parts before each use.
2. Check the covers and protective devices for damage
and correct seating. Replace them if necessary.
11.2.1 Replace the paper filter bag (21),
foam filter (22) or filter cartridge (23)
(Fig.2)
1. Remove all nozzles (16/17/19/20) and the telescopic
pipe (14) from the holder (2a/4b).
2. Take off the container cover (2) as described in 8.1.
3. Flip the container cover (2).
4. Pull the foam filter (22) or the filter cartridge (23) off
the filter basket (11) or remove the paper filter bag
(21) from the fitting port (7a).
5. To replace the paper filter bag (21), proceed as de-
scribed in 8.4.1.
6. Fit the new foam filter (22) to the filter cage (11) as
described in 8.4.2.
7. Fit the new filter cartridge (23) to the filter cage (11) as
described in 8.4.3.
8. Close the container (3) again with the container cover
(7).
12 Storage and transport
12.1 Storage
• Clean and check the product for damage.
Store the product and its accessories in a dark, dry and
frost-free place that is inaccessible to children.
The optimum storage temperature is between 5°C and
30˚C.
Store the product in its original packaging.
Cover the product to protect it from dust or moisture.
Store the operating manual with the product.
12.2 Transport
1. To transport the product, disconnect the it from the
power supply and set it up in the new position you
want to use it in.
24 | GB www.scheppach.com
Bekijk gratis de handleiding van Scheppach VC30 Premium, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | VC30 Premium |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 12770 MB |
