Scheppach VC25 handleiding
Handleiding
Je bekijkt pagina 21 van 248
8.2 Fitting the container (3) to the base
frame (4) (Fig.4)
1. Put the container (3) on the base frame (4).
2. Gently push the container (3) onto the base frame (4).
3. Ensure that the locking mechanism of the base frame
(4) engages on the container (3).
8.3 Fitting the rollers (5) (Fig.5)
1. Remove the container cover (7) as described in 8.1.
2. Set the container down (3) on a solid surface with the
underside facing upwards.
3. Place the rollers (5) into the assembly holes (4b) pro-
vided on the base frame (4).
4. Gently press the rollers (5) into the assembly holes
(4b).
5. Flip the container (3) and place it on the rollers (5).
8.4 Filter and filter bag (Fig.2)
The product has the following filter and filter bag included
in the scope of delivery:
Paper filter bag (15)
• Dry vacuuming
Foam filter (16)
• Wet vacuuming
Note:
1. In order to fit/remove the filter and filter bag, remove
the container cover (7) as described under 8.1.
2. Always set down the container cover (7) with the top
facing downwards.
3. After you have assembled/removed the desired filter
and filter bag, reattach the container cover (7) to the
container (3).
8.4.1 Fitting/removing the paper filter bag
(15) (Fig.6)
Removing:
1. Remove the paper filter bag (15) from the bar (6a) on
the suction connection (6).
Assembling:
1. Attach the paper filter bag (15) to the bar (6a) on the
suction connection (6) inside the container (3).
2. Check that the paper filter bag (15) is installed correct-
ly and the sealing ring (15a) fully envelopes the bar
(6a) on the suction connection (6).
8.4.2 Fitting/removing the foam filter (16)
(Fig.7)
Removing:
1. Remove the foam filter (16) from the filter cage (9).
Assembling:
1. Remove the foam filter (16) over the filter cage (9).
2. Check that the foam filter (16) is installed correctly
and fully envelopes the filter cage (9).
8.5 Connecting the suction hose (10)
8.5.1 Suction function (Fig.8)
1. Push the hose coupling (10a) fully into the suction
connection (6).
2. Turn the hose coupling (10a) clockwise until it fully en-
gages.
3. Check that the suction hose (10) is installed correctly
by gently pulling on the hose coupling (10a).
8.5.2 Blast function (Fig.9)
1. Push the hose coupling (10a) fully into the blowing
connection (2).
2. Turn the hose coupling (10a) clockwise until it fully en-
gages.
3. Check that the suction hose (10) is installed correctly
by gently pulling on the hose coupling (10a).
8.6 Uncoupling the suction hose (10)
(Fig.8,9)
Uncouple the suction hose (10) from the suction connec-
tion (6) or the blast connection (2):
1. Turn the hose coupling (10a) counter-clockwise.
2. Pull the hose coupling (10a) out of the suction con-
nection (2) or the blowing connection (10).
8.7 Storing the nozzles (13/14), suction
pipe (12) and suction hose (10)
(Fig.2,3,10)
1. You can store the nozzles (13/14) and the suction
pipe (12) in the holders (7a/4a) on the container cover
(7) and on the base frame (4).
2. You can store the suction hose (10) in the holders
(7a) on the container lid (7).
3. You can store the cable on the holder on the blowing
connection (2).
8.8 Attaching the suction pipe (12)
(Fig.11)
1. Attach a suction pipe (12) to the handle (11).
Connect the suction pipe (12) at the desired length.
8.9 Using the various nozzles (13/14)
(Fig.11)
Floor nozzle (13)
• Vacuuming of solid materials and liquids on medium
to large surfaces, carpets or floor mats.
• Use the floor nozzle (13) in conjunction with the suc-
tion pipes (12).
• If required, it can also be used without the extensions.
Joint nozzle (12)
• Vacuuming of solid materials and liquids in joints, cor-
ners, radiators and hard-to-reach areas.
8.9.1 Fitting the nozzle (Fig.11)
1. Insert the desired nozzle (13/14) into the handle (11)
or the suction pipe (12).
2. Remove the nozzle (13/14) by pulling it forwards off
the respective suction pipe (12) or off the handle (11).
GB | 21www.scheppach.com
Bekijk gratis de handleiding van Scheppach VC25, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | VC25 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 33344 MB |
