Scheppach VC20 handleiding
Handleiding
Je bekijkt pagina 21 van 204
www.scheppach.com
GB
|
21
10. Storage
Store the device and its accessories in a dark, dry and
frost-free place that is inaccessible to children. The
optimum storage temperature is between 5 and 30˚C.
Store the power tool in its original packaging.
Cover the power tool to protect it from dust or moisture.
Store the operating manual with the power tool.
Storage (Fig. 1, 11)
• Wind the connection cable (3) around the machine
head (2) and lay it in the top cable holder (10).
• There are four recesses on the top side of the caster
mounting base (6) for storage of the oor nozzle (16),
the joint nozzle (17) and the plastic extension tubes (18).
• The remaining accessories can be stored in the
stainless steel container (7).
11. Electrical connection
The electrical motor installed is connected and
ready for operation. The connection complies
with the applicable VDE and DIN provisions. The
customer's mains connection as well as the ex-
tension cable used must also comply with these
regulations.
Damaged electrical connection cable
The insulation on electrical connection cables is of-
ten damaged.
This may have the following causes:
• Pressure points, where connection cables are
passed through windows or doors.
• Kinks where the connection cable has been improp-
erly xed or routed.
• Places where the connection cables have been cut
due to being driven over.
• Insulation damage due to being ripped out of the wall
outlet.
• Cracks due to the insulation ageing.
Such damaged electrical connection cables must not be
used and are life-threatening due to the insulation damage.
Check the electrical connection cables for damage regu-
larly. Ensure that the connection cables are disconnect-
ed from electrical power when checking for damage.
Electrical connection cables must comply with the ap-
plicable VDE and DIN provisions. Only use connection
cables with the designation H05VV-F.
The printing of the type designation on the connection
cable is mandatory.
m ATTENTION!
The device is not suitable for vacuuming ammable
liquids. For wet vacuuming, use the only the foam lter
(14) provided.
To remove liquid, take o the machine head (2) by re-
leasing the locking hooks (4) from the stainless steel
container (7). Pour out the liquid residue.
9. Cleaning and maintenance
m WARNING! Pull out the mains plug before carrying
out any setting, servicing or repair work!
Cleaning
It is recommended to clean the device after each use.
Do not spray the device with water or clean it under
running water. This can result in electric shocks and
can damage the device.
Residual liquid remains in the stainless steel contain-
er (7). To remove residual liquid, take o the machine
head (2) by releasing the locking hooks (4) from the
stainless steel container (7). Pour out the liquid resi-
due. Clean the container with a damp cloth.
• Replace paper lter bag when full
• Always keep the device clean. Do not use cleaning
agents or solvents.
• Keep the ventilation slots clean and free of dirt and
dust.
• Clean the device only with a soft brush or a damp
cloth.
• Clean the foam lter (14) and the textile lter (19)
with a little soap and running water and then leave
it to air dry.
Maintenance
The device is maintenance-free
Service information
With this product, it is necessary to note that the follow-
ing parts are subject to natural or usage-related wear,
or that the following parts are required as consuma-
bles.
Wearing parts: Foam lter, paper lter bag, textile lter
* may not be included in the scope of delivery!
Spare parts and accessories can be obtained from our
Service Centre. To do this, scan the QR code on the
front page.
Bekijk gratis de handleiding van Scheppach VC20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | VC20 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 26479 MB |
