Scheppach MS173-51E handleiding
Handleiding
Je bekijkt pagina 39 van 144
www.scheppach.com
GB
|
39
• Regularly check the catch basket for signs of wear
and loss of functionality.
• Clean the collection basket regularly with water and
allow it dry well.
• For safety reasons, replace worn or damaged parts.
• When storing the machine for a longer period of time
or when maintaining it, the fuel tank must be emptied.
This should only be done outdoors using a petrol suc-
tion pump (available from DIY shops).
m WARNING
Never work on or touch conducting parts on the ignition
unit with the engine running. Always remove the spark
plug connector from the spark plug before starting any
work of care or maintenance. Never perform any work
on the machine while it is running. Any work not de-
scribed in this operating manual must be performed by
an authorised service workshop only.
Attention!
Always shut the engine down and remove the spark plug
connector before carrying out any maintenance work.
Wheel axles and wheel hubs
• These should be lightly greased once a season.
Blade
For safety reasons, only have your mowing blade
sharpened, balanced and tted by an authorised spe-
cialist workshop. For optimum results it is recommend-
ed that the blade should be inspected once a year.
Change the blade (Fig. 17)
When changing the cutting tool, only use original re-
placement parts.
Wear gloves to avoid cut injuries while changing the
blade.
Never install another blade.
• Empty the fuel tank before removing the blade.
• Undo the screw to replace the blade.
• Install everything as described in Fig. 17. Fasten the
screw correctly. The fastening torque in 45 Nm. Also
replace the blade screw when replacing the blade.
Damaged blades
Should the blade, in spite of all precautions, come into
contact with an obstruction, shut down the engine im-
mediately and remove the spark plug connector.
Tip the lawnmower onto its side and check the blade for
damage. Damaged or bent blades must be replaced.
• Never store the lawnmower with petrol in the tank
inside a building in which petrol fumes may come
into contact with naked ames or sparks.
• Allow the engine to cool down before you put the
lawnmower in an enclosed area.
• In order to avoid re hazards, keep the engine, ex-
haust pipe and the area around the fuel tank free of
grass, leaves and leaking grease (oil).
Preparing the lawnmower for long-term storage
Warning: Do not remove the petrol in enclosed spaces,
near re or when smoking. Petrol fumes can cause ex-
plosions and re.
• Empty the fuel tank with a petrol extraction pump.
• Start the engine and let it run until the remaining pet-
rol is used up.
• Change the oil at the end of every season. To do so,
remove the used engine oil from a warm engine and
rell with fresh oil.
• Remove the spark plug from the cylinder head.
• Fill the cylinder with approx. 20 ml of oil from an oil can.
• Slowly pull back the starter handle, which will bathe
the cylinder wall with oil.
• Attach the spark plug again.
• Clean the cooling ns of the cylinder and the housing.
• Be sure to clean the entire device to protect the
paint.
• Store the device in a well-ventilated place.
Battery and battery charger
Disconnect the battery charger and store it in a cool, dry
place when not in use. In humid environments, corrosion
of terminals and electrical contacts may occur. If stored
for a long time at high temperatures (50°C), the battery
may be permanently damaged. Check electrical terminals
and contacts on battery and battery charger.
Wipe with a clean cloth or blow clean with compressed
air.
Normal charging may be required after storage. To check
the available charge, press the battery level indicator
button (E) and charge if necessary. See the battery level
indicator section.
13. Maintenance
• Regular, careful servicing is required to guarantee
the safety level and performance of the device.
• Make sure that all nuts, bolts and screws are secure-
ly tightened so that the device is in a safe working
condition.
Bekijk gratis de handleiding van Scheppach MS173-51E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | MS173-51E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 22629 MB |
