Scheppach MS173-51E handleiding
Handleiding
Je bekijkt pagina 35 van 144
www.scheppach.com
GB
|
35
m Attention!
The engine does not come with oil in it. Therefore,
ensure that you add oil before starting it up. Use
normal, multigrade oil (SAE 30). The oil level in the
engine must be checked each time before mowing.
You will also need to ll in petrol, as this is also not
supplied upon delivery.
• In order to avoid any unintentional start-ups of the
lawnmower, it comes equipped with an engine brake
(g. 1/item 3) which must be pulled back before the
engine can be started. When the engine control le-
ver is released it must return to its initial position,
at which point the engine automatically switches o.
• Press the engine brake lever (3) together and give
the pull cable starter (17) a vigorous pull. (Fig. 14)
ATTENTION: When you pull the pull cable starter,
the cutting blade rotates even with a dissolved en-
gine brake lever. Make sure that there are no body
parts in the danger zone of the cutting blade.
• When the engine is running, press the drive lever
(2) to the handle (1) in order to engage the drive on
the mower.
• Before you start mowing, you should run through
this process several times in order to ensure that the
machine is working properly.
•
m WARNING
Whenever you need to perform any kind of adjust-
ment and/or repair work on your lawnmower, wait
until the blade has come to a complete stop.
Always switch o the engine and take out the spark
plug before carrying out any adjustments, mainte-
nance or repairs.
Using the drive:
• Engine brake (3): Use the lever to stop the engine.
When you release the lever the engine and the blade
stop automatically.
• To mow, pull the drive lever (2) towards the handle (1).
Before actually mowing, check the start/stop lever sev-
eral times. Ensure that the pull cable can be smoothly
operated.
• Drive lever (2):
If you press this, the clutch for the drive will be
closed and the lawnmower will start to move with the
engine running. Release the drive lever in time to
stop the moving lawn mower. Practice starting and
stopping before you use the mower for the rst time
until you are familiar with controlling the mower.
4. Pull the throttle cable through the electric starter
unit (18) as shown in gure 5a.
5. Use a pliers to place the throttle cable in the en-
gine brake lever (3). (Fig. 5b-5c)
6. Secure the electric starter unit to the upper push
bar (4) using the screws (f). (g. 5d)
7. Insert the handle of the pull cable starter (17) in the
designated hook as shown in g. 6.
8. Secure the pull cables to the push bar with the ca-
ble clip (e) (Fig. 7).
9. Catch basket (16) - open it up and click the plastic
clips into position on the frame. (Fig. 8)
10. Mowing without the catch basket:
Lift the discharge ap (15) with one hand and hook
in the catcher bag (16) as shown in Fig.9.
11. Mulching:
Remove the catch basket (16), if tted, and insert
the mulching insert (19) as shown in Figs. 10-12.
Attention:
The side discharge cover must not be installed when
mulching.
Setting the cutting height
m Attention! Adjust the cutting height only when
the engine is switched o and the plug boot has
been pulled.
• Before you begin to mow, check to ensure that the
blade is not blunt and that none of the fasteners are
damaged.
• To prevent any imbalance, replace blunt and/or dam-
aged blades as a set only (if applicable). To carry out
this check, rst switch o the engine and pull the spark
plug connector.
• The cutting height is centrally adjusted with the
wheel height adjustor lever (g. 13/ item 14). 5 dier-
ent cutting heights can be set.
• Pull the adjustor lever out and select the desired cut-
ting height. The lever snaps into the desired position
(g. 13).
Preparing the area to be mowed
Before mowing, carefully examine the area. Remove
stones, sticks, bones, wires, toys and other objects that
may be ejected by the device.
9. Start-up
m ATTENTION!
Always make sure the device is fully assembled
before commissioning!
Bekijk gratis de handleiding van Scheppach MS173-51E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | MS173-51E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 22629 MB |
