Scheppach HBS25 SE handleiding
Handleiding
Je bekijkt pagina 26 van 56
c) Operate the band saw at the proper speed for rec-
ommended applications and materials. Using a
speed inappropriate for the material being cut may
lead to breakage of the saw band and personal injury.
d) Do not operate the tool when the band saw blade
access cover is open. Contact with the moving parts
may result in personal injury.
5.2 Additional safety instructions
WARNING
Tool attachments may be sharp and become hot during
use. Always wear protective gloves when handling the
tool attachments.
• When cutting round or irregular shaped wood, use a
device to secure the workpiece and prevent it turning.
• When cutting boards on edge, use a device to prevent
the workpiece kicking back.
• If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust ex-
traction can reduce dust-related hazards.
• The product may only be operated by people who are
familiar with handling it.
WARNING
The supplied band saw blade is only intended for the
sawing of wood! Do not use this blade for sawing fire-
wood!
• Before commissioning, ensure that the mains voltage
matches with the operating voltage on the type plate.
• Long supply cables, extensions, cable reels, etc.
cause a drop in voltage and can impede motor start-
up.
• Keep children and other people away while using the
product. Distractions may cause you to lose control of
the product.
• Observe the direction of rotation of the motor and saw
band.
• Never operate the product with defective Protective
devices or without safety devices.
• Do not process workpieces that are too small in order
to keep them secure in your hands.
WARNING
Danger of injury!
If you remove blockages with your bare hands, you may
injure yourself.
– Wear protective gloves.
– Use suitable tools (e.g. a wooden stick).
• Set the adjustable guards such that they are as close
as possible to the workpiece.
• Protective covers must not be used for transport or
improper operation of the product.
WARNING
Do not use damaged or deformed tool attachments.
WARNING
Make sure that the tool attachment is suitable for the
material to be processed.
WARNING
With a damaged table inlay there is a risk of small parts
jamming between table inlay and saw blade, blocking
the saw blade.
Immediately replace damaged table inlays!
WARNING
There is a risk of accident! Always carry out
cleaning work when the product is switched
off. There is a danger of injury! Let the prod-
uct cool down before cleaning. Elements of
the engine are hot. There is a danger of injury
and burning!
The product can start unexpectedly and cause injuries.
– Switch off the product before all cleaning work.
– Allow the engine to cool down.
ATTENTION
The teeth of the band saw blade must point downwards.
• Do not use the product if it is damaged. Never remove
protective devices from the product. This can result in
serious injuries.
• For mitre cuts with an inclined saw table, the parallel
stop should be placed on the lower part of the saw ta-
ble.
ATTENTION
Secure long workpieces against tipping at the end of
the cutting process (e.g. with a roller stand or similar).
• Keep your hands at a safe distance from the band
saw blade. Use a push stick for narrow cuts.
• Store the push stick on the holder provided for it on
the product so that you can reach it from your normal
working position and always have it to hand.
• Switch the product off if it is not in use.
• In the normal working position, the operator is in front
of the product.
Residual risks
The product has been built according to state-of-the-
art and the recognised technical safety rules.
However, individual residual risks can arise during
operation.
• Residual risks can be minimised if the "Safety Instruc-
tions" and the "Intended Use" together with the oper-
ating manual as a whole are observed.
• Use the product in the way that is recommended in
this operating manual. This is how to ensure that your
product provides optimum performance.
• Furthermore, despite all precautions having been met,
some non-obvious residual risks may still remain.
26 | GB www.scheppach.com
Bekijk gratis de handleiding van Scheppach HBS25 SE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | HBS25 SE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8367 MB |
