Scheppach BCHS350-ProS handleiding
Handleiding
Je bekijkt pagina 40 van 72
www.scheppach.com
40
|
GB
12. Basic working notes
m Attention!
Always make sure the device is fully assembled
before commissioning!
Danger of injury!
Sawing and felling work as well as all related work may
only be carried out by specially trained and briefed
persons.
Note
Observe the country-specic regulations for felling
work and obtain information from the relevant author-
ity.
• Make sure that no one can be harmed by the falling
branches and trees.
• Only the persons required for the felling work may
be in the work area.
• Keep the work area at the trunk clear and tidy so
that operators have a safe standing area.
• Keep escape routes clear and tidy in order to be
able to leave the work area quickly.
• Do not carry out felling work in stronger wind con-
ditions, bad weather or poor visibility.
• Keep distances to the nearest workplace of at least
2 1/2 tree lengths.
12.1 Use and handling
• Never start the device before the guide rail (7), saw
chain (6) and chain cover (12) are correctly tted.
• Do not cut wood that is lying on the ground or try to
cut roots that are sticking out of the ground.
• In any case, make sure the saw chain (6) does not
come into contact with the soil, otherwise the saw
chain (6) will dull immediately.
• If you accidentally touch a solid object with the de-
vice, switch o the engine immediately and inspect
the device for any damage.
• Maintain the device carefully. Check for misalign-
ment or binding of moving parts, breakage of parts
and any other condition that may aect the device’s
operation. Have damaged parts repaired before us-
ing the device. Many accidents are caused by poor-
ly maintained devices.
• Keep cutting tools sharp and clean. Properly main-
tained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
• Have the device serviced by qualied personnel.
• Only use manufacturer’s recommended original
spare parts.
11. Commissioning
m CAUTION!
Please observe the legal provisions from the noise pro-
tection ordinance.
Before each start-up, check the device for the follow-
ing:
• Leak-tightness of the fuel system
• Faultless condition and completeness of the guards
and the cutting device
• Tight t of all screw connections
• Working notes on smooth running of all moving parts
• Familiarise yourself with handling the chainsaw be-
fore use.
11.1 Switching on the device (Fig. 14 - 16)
m WARNING!
Ensure that the saw chain is not yet applied to the
cut and that no other objects are touched: Danger
of injury!
• Hold the chainsaw rmly with both hands and make
sure that no persons (in particular children) or ani-
mals are in the immediate vicinity.
• Make sure that the chain brake is released before
starting the chainsaw. To do so, draw the hand
guard back in the direction of the bow-type han-
dle. (Fig. 14)
1. Press the main switch (17) until the LED lamp
lights up. (Fig. 15)
2. Press and hold down the switch lock (3).
3. Press the on/o switch (2). The saw chain (6)
starts running.
4. Release the switch lock again. (Fig. 16)
11.2 Switching o the device (Fig. 17)
1. Release the on/o switch (2).
2. Press the main switch (17) until the LED lamp
goes out.
11.3 Displaying the charge level (Fig. 18)
1. By pressing the button on the battery (18) it is
possible to check the charge level with the battery
charge indicator LED (20).
2. The light goes out after 5 seconds. If the LED
ashes, the battery (18) must be charged. If no
LED lights up when the button is pressed, the bat-
tery (18) is defective and must be replaced.
Bekijk gratis de handleiding van Scheppach BCHS350-ProS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | BCHS350-ProS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10398 MB |
