Scheppach AWH-500BL handleiding
Handleiding
Je bekijkt pagina 20 van 212
www.scheppach.com
20
|
GB
7. Solar cell
8. Filter cassette (ADF lter)
9. Rear panel
10. UV/IR lter
11. Delay setting
12. Sensitivity setting
13. Sensor
14. Test button
15. Battery cover
16. LED display
17. Operating mode selector switch
18. LCD display (LCD)
3. Scope of delivery
m ATTENTION! The device and the packaging are
not children’s toys! Do not let children play with
plastic bags, lms or small parts! There is a danger
of choking or suocating!
• 1x automatic welding helmet
• 1x operating manual
• Open the packaging and carefully remove the device.
• Remove the packaging material, as well as the
packaging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the device and accessory parts for trans-
port damage.
• If possible, keep the packaging until the expiry of
the warranty period.
4. Proper use
This welding helmet protects the eyes and face from
sparks, splashes and UV radiation during welding and
automatically adapts to the lighting conditions.
It ensures immediate, sensor-controlled dimming when
the arc is ignited and automatic relighting at the end of
the welding process (including a short delay to protect
against afterglow). The welding helmet has an innitely
adjustable DIN protection level with side adjustment
wheel and can also be adjusted for ying sparks dur-
ing grinding work.
Only use the product as described and for the speci-
ed areas of application. Store this operating manual
safely. If the device is passed on to a third party then
likewise pass all of the documentation on with it. Any
use that deviates from the intended use is prohibited
and potentially dangerous.
1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new product brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability
for damage to the product or caused by the product
arising from:
• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorised
specialists
• Installing and replacing non-original spare parts
• Improper use
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
57113 / VDE 0113 not being observed
Note:
The operating manual is part of this product. It in-
cludes important instructions for the safe, proper and
economic operation of the product, for avoiding dan-
ger, for minimising repair costs and downtimes and
for increasing the reliability and extending the service
life of the product. In addition to the safety instructions
in this operating manual, you must also observe the
regulations applicable to the operation of the product
in your country. Familiarise yourself with all operating
and safety instructions before using the product. Only
operate the product as described and for the specied
areas of application. Keep the operating manual in a
good place and hand over all documents when passing
the product on to third parties.
2. Device description
1. Helmet shell
2. Head band
3. Head band rear knob
4. Head band side knob
5. Darkening control
6. Front panel
Bekijk gratis de handleiding van Scheppach AWH-500BL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | AWH-500BL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 28998 MB |
