Scarlett SC-SF111B31 handleiding

Handleiding

12345678910111213141516/ 16

Afdrukken

Je bekijkt pagina 14 van 16

IM022

www.scarlett.ru SC-SF111B31

14

 Do not use other attachments than those supplied.

 In case of power cord is damaged, its replacement should be

done by the manufacture or service department or the other

high-skill person to avoid any danger.

 Keep the cord away from sharp edges and hot surfaces.

 Do not pull, twist, or wrap the power cord around the appliance.

 Avoid contact with moving parts of the device. Do not put

pencils or other objects through the protective grid of the fan.

 Do not operate without fan installed protective grid.

 Ensure that the fan is switched off from the supply mains before

removing the guard.

 Do not attempt to repair, adjust or replace parts in the

appliance. Repair the malfunctioning appliance in the nearest

service center.

 If the product has been exposed to temperatures below 0ºC for some time it should be kept at

room temperature for at least 2 hours before turning it on.

 The manufacturer reserves the right to introduce minor changes into the product design without

prior notice, unless such changes influence significantly the product safety, performance, and

functions.

 Manufacturing date is indicated on the unit and/or on packing as well as in accompanying

documents in the following format XX.XXXX where first two figures XX is the month of

production, and following four figures XXXX is the year of production.

ASSEMBLING INSTRUCTIONS:

 The device is intended for air circulation in the room.

 Fan is packed disassembled. Before assembling make sure that all the required parts are

undamaged and included into the set.

 Do not plug in the device before its assembling is finished.

 Tighten stand tube to stand base with screw. Fix base cover to stand base with a screw

(supplied with a set).

 Unscrew out-joint, put the stand cover and base cover on the stand base, pull the extension

pole out then tighten the out-joint again.

 Place control box firmly on top of extension pole, tighten screw B.

 Unscrew the blade cap by turning clockwise and rear grill nut by turning counter clockwise and

put both blade cap and rear grill nut off the motor shaft.

 Put rear grille on motor shaft.

 Secure it with rear grille nut.

 Slide blades on motor shaft so that claws on motor shaft match the blades slots.

 Screw blade cap on shaft by turning counter clockwise.

 Put front grille on rear grille and close clips or screw grille ring to secure grilles together.

 Adjust the fan vertically by vertical adjustment screw.

 The fan is ready for work.

OPERATION MANUAL

 CAUTION: To avoid electroconvulsive shock or fire danger, do not operate fan under the

conditions of increased humidity.

 Place fan only onto dry flat unyielding surface.

 The fan can work in three speed modes:

- “1” For minimum operational speed;

12345678910111213141516/ 16

Bekijk gratis de handleiding van Scarlett SC-SF111B31, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Ventilator