Scarlett SC-EC2000-S1M handleiding
Handleiding
Je bekijkt pagina 5 van 24
IM2025
5
5. DEVICE DESCRIPTION
1. Air outlet grate
2. Carrying handle
3. Heating power mode regulator
4. Thermostat knob
5. Support feet
6. Air intake grate
6. DELIVERY SET
1. Electric convector - 1 pc.
2. Supporting feet - 2 pcs.
3. Fixing screws set – 1 set
4. Instruction manual - 1 pc.
5. Warranty card - 1 pc.
7. ASSEMBLY AND INSTALLATION
The convector is equipped with feet for installation on the floor.
Connecting feet to the convector
1. Before using the convector, remove the set of feet and fixing screws from the package.
Install the feet on the bottom of the convector. Fix the feet with screws, screwing them
through special holes to the bottom panel.
2. Install the convector on the floor and make sure it is stable.
Connecting to the network
1. Convector is designed for connection to the socket with single-phase voltage 220-
240V~/50Hz.
2. Before connecting, make sure that the voltage is correct as specified on the
nameplate with the technical data of the device.
3. When connecting the convector to the mains, the applicable electrical safety rules
must be observed.
Bekijk gratis de handleiding van Scarlett SC-EC2000-S1M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scarlett |
| Model | SC-EC2000-S1M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2518 MB |
