Sauermann Si-CPE320 handleiding
Handleiding
Je bekijkt pagina 14 van 38
14 Transmitter features
7. Transmitter features
7.1 General features
Power supply
24 V
AC
/ V
DC
±10%
Warning: risk of electric shock
Outputs
3 x 0/4-20 mA or 3 x 0-5/10 V (4 wires)
Common mode voltage
Maximum load: 500 Ω (0/4-20 mA)
Minimum load: 1 KΩ (0-5/10 V)
Galvanic isolation On the output
Consumption with
probe and without
option
15 VA
Electrical
connections
Screw terminal block for cables from 0.05 to
1.5 mm
2
or from 30 to 16 AWG
Carried out according to the code of good practices
Communication
RS485
Modbus RTU protocol, congurable
communication speed from 2400 to 115,200 Bauds
Wireless communi-
cation (option)
Range frequency from 2402 MHz to 2480 MHz with a transmission power of 0 dBm.
Range up to 15 m (50 ft), depending on smartphone radio strength.
Minimum required versions:
Android 5.0, iOS 12.4, BLE 4.0
Audible alarm Buzzer (60 dB at 10 cm)
Environment and
type of uid
Air and neutral gases
Conditions of use
(°C/%RH/m)
From -10 to 50 °C (14 to 122 °F)
In non-condensing condition
From 0 to 2000 m (0 to 6561’)
Storage
temperature
From -10 to 70 °C (14 to 158 °F)
Security Protection class 2 - Pollution degree 2 - Overvoltage category 2
European directives
2014/30/EU EMC - 2014/35/EU Low Voltage - 2014/53/EU (RED) - 2015/863 EU (RoHS
3) - 2012/19/EU WEEE
7.2 Features of the housing
Front face Brushed stainless steel 316 L
Back housing ABS V0
Protection IP66 in front face, resistant against VHP
Display
Graphic touchscreen
Size: 480 x 272 pixels
Height of the digits 14 mm (0.56’’)
Back ttings Barbed tting Ø 5.2 mm (Ø 0.2’’)
Weight 684.4 g (1.5 lb)
Bekijk gratis de handleiding van Sauermann Si-CPE320, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sauermann |
| Model | Si-CPE320 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4198 MB |
