Sanus VLFS820 handleiding
Handleiding
Je bekijkt pagina 7 van 28
7
CAUTION: Avoid potential personal injury or property damage!
● Mount wall plate
08
directly onto concrete surface (no wall covering)
● Minimum solid concrete thickness: 8 in. (203 mm)
● Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
● Minimum spacing between lag bolts is 16 in.
● For concrete applications, arm assembly
11
(STEP 3) must remain centered in wall plate
08
.
Keep this in mind when selecting wall plate location
Solid Concrete or Concrete Block Installation
STEP 2B Attach Wall Plate
Concrete Anchors are not included
Contact Customer Service:
US: 1-800-359-5520
EMEA: +31 (0) 495 580 852
UK: +44 (0) 800 056 285
to inquire about the concrete anchors.
1
2
3/8 in.
(10 mm)
3 in. (8 cm)
002862.eps
07
07
3
4
CAUTION: Be sure the anchors
C1
are seated flush with the
concrete surface.
CAUTION: Never drill into the mortar between blocks.
08
CAUTION: Avoid potential personal injury or property damage!
Improper use could reduce the holding power of the lag bolt
09
.
Tighten the lag bolts
09
and lag washers
10
only until they are
pulled FIRMLY against the wall plate
08
.
DO NOT over-tighten the lag bolts
09
.
C1
Concrete achors (Fischer UX10 x 60R)
C1
available through Customer Service.
09
10
Bekijk gratis de handleiding van Sanus VLFS820, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sanus |
| Model | VLFS820 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8540 MB |
