Sanus VLF828 handleiding
Handleiding
Je bekijkt pagina 9 van 32
9
1
2
3/8 in.
(10 mm)
3 ¾ in. (9.5 cm)
002862.eps
05
CAUTION: Avoid potential personal injury or property damage!
● Mount wall plate
06
directly onto concrete surface (no wall covering)
● Minimum solid concrete thickness: 8 in. (203 mm)
● Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
● For concrete applications, arm assembly
09
(STEP 3) must remain centered
in wall plate
06
. Keep this in mind when selecting wall plate location
Solid Concrete or Concrete Block InstallationSTEP 2B Attach Wall Plate
3
4
CAUTION: Be sure the anchors
08
are seated flush with the
concrete surface.
CAUTION: Never drill into the mortar between blocks.
CAUTION: Avoid potential personal injury or property damage!
Improper use could reduce the holding power of the lag bolt
07
.
Tighten the lag bolts
07
only until they are pulled FIRMLY against the wall
plate
06
. DO NOT over-tighten the lag bolts
07
.
07
08
06
CAUTION:
Avoid potential personal injury or
property damage!
Install lag bolts into
the slots AS SHOWN.
Three (3) lag bolts
07
at the top.
One (1) lag bolt
07
at the bottom.
#
1
#
2
#
3
#
4 (Center)
#
2
#
6
#
1
#
3
#
5
#
7
#
4
(Center)
3
X
1
X
Bekijk gratis de handleiding van Sanus VLF828, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sanus |
| Model | VLF828 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8916 MB |
