Sanus VLF828 handleiding
Handleiding
Je bekijkt pagina 8 van 32
8
STEP 2A Attach Wall Plate
1
2
Min.
16 in.
(406 mm)
Max.
5/8 in. (16 mm)
05
● Drywall covering the wall must not exceed 5/8 in. (16 mm)
● Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1½ x 3½ in. (38 x 89 mm)
● Minimum spacing between studs: 16 in. (406mm)
● Stud center must be verified
Wood Stud Installation
07
3 4
3 ½ in. (9 cm)
7/32 in.
(5.5 mm)
05
IMPORTANT: Be sure to drill into the center of the stud.
CAUTION: Avoid potential personal injury or property damage!
CAUTION: Avoid potential personal injury or property damage!
Improper use could reduce the holding power of the lag bolt
07
.
Tighten the lag bolts
07
only until they are pulled FIRMLY against the wall
plate
06
. DO NOT over-tighten the lag bolts
07
.
Go to STEP 3 on PAGE 10.
06
Bekijk gratis de handleiding van Sanus VLF828, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sanus |
| Model | VLF828 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8916 MB |
