Samsung WD25DB8995 handleiding
Handleiding
Je bekijkt pagina 12 van 64
English12
Connect the water hose
NOTE
These instructions are for the threaded water tap. For more detailed instructions or instructions for connecting
the water hose to a non-threaded water tap, please visit the website on the cover of this manual and check the
web manual.
1. Connect the water hose to the water tap, and then turn it to the right to tighten.
CAUTION
Before connecting the water hose, make sure there is a rubber washer in the hose connectors. Do not use the
hose if the washer is damaged or missing.
2. Connect the other end of the water hose to the inlet valve on the back of the washing machine, and then
turn it to the right to tighten.
3. Slowly open the water tap and check if there are any leaks around the connection areas. If there are water
leaks, repeat step 1 and 2.
WARNING
If there is a water leak, stop operating the washing machine and disconnect it from the electrical supply.
Contact a local Samsung service centre in case of a leak from the water hose, or contact a plumbing technician
in case of a leak from the water tap. Otherwise, this may cause electric shock.
CAUTION
Do not stretch the water hose by force. If the hose is too short, replace the hose with a longer, high-pressure
hose.
For models with an additional hot water inlet:
1. Connect the red end of the hot water hose to the hot water inlet on
the back of the machine.
2. Connect the other end of the hot water hose to the hot water tap.
DC68-04355S-00_IB_T-PJT_WD8000D_EN.indd 12 2024-06-25 2:32:58
Bekijk gratis de handleiding van Samsung WD25DB8995, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | WD25DB8995 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 5829 MB |
