Samsung WD25DB8995 handleiding
Handleiding
Je bekijkt pagina 11 van 64
English 11
Select a location
Location requirements:
• Solid, level surface without carpeting or flooring that may obstruct ventilation
• Away from direct sunlight
• Adequate room for ventilation and wiring
• The ambient temperature is always higher than the freezing point (0 ˚C)
• Away from a heat source
Remove the shipping bolts
WARNING
To avoid injury, cover the holes with bolt caps after removing the shipping bolts. Do not move the washing
machine without the shipping bolts in place. Assemble the shipping bolts before moving the washing machine
to another location. Keep the shipping bolts in a safe place for future use.
1. After unpacking the product, remove all shipping bolts.
- Use the enclosed end of the supplied spanner to remove the shipping bolts.
2. Fill the holes with the supplied plastic bolt caps.
Keep the shipping bolts for future use.
3. Close all plastic bolt caps on the rear of the washing machine.
Adjust the levelling feet
1. Gently slide the washing machine into position. Excessive force may damage the levelling feet.
2. Level the washing machine by manually adjusting the levelling feet.
3. When levelling is complete, tighten the nuts using the spanner.
CAUTION
• When installing the product make sure the levelling feet is not pressing the power cord.
• Make sure all the levelling feet are seating on the floor surface to avoid the washing machine from moving
or generating noise due to vibration. Then, check if the washing machine is rocking. If the washing machine
is not rocking, tighten the nuts.
DC68-04355S-00_IB_T-PJT_WD8000D_EN.indd 11 2024-06-25 2:32:57
Bekijk gratis de handleiding van Samsung WD25DB8995, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | WD25DB8995 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 5829 MB |
