Handleiding
Je bekijkt pagina 30 van 96
Installation
English30
Managing the water leakage
If you see the leakage check code ( LC) on the control panel after the test operation, follow these
instructions.
1. Touch and hold the Start button for more than 3 seconds to start draining.
2. When the draining is complete, unplug the dishwasher and close the water supply valve.
3. Check if the water inlet valve leaks.
- If the leak is from the water inlet valve, reconnect the 90° fitting with the hot water supply line.
4. After reconnecting the 90° fitting with the hot water supply line, lay down the dishwasher and wipe out
moisture from the water leakage sensor. (Refer to the figure.)
5. Plug in the dishwasher and open the water supply valve.
6. Run the Smart Install Cycle again.
NOTE
If the leakage check code ( LC) remains after following the steps, stop the installation and contact a local
service center for assistance.
Untitled-11 30Untitled-11 30 2024-12-09 4:27:382024-12-09 4:27:38
Bekijk gratis de handleiding van Samsung DW90F89P0US, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | DW90F89P0US |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 9799 MB |
