Handleiding
Je bekijkt pagina 13 van 84
●
●
●
●
Temperature display switchover function
no display
●
●
●
ambient temperature on indoor unit's display. The
setting on remote controller is selected circularly
as below:
Function introduction for
button
combination buttons
Child lock function
SLEEP
Under OFF status, press "-" and "MODE" buttons
simultaneously to switch temperature display
between
℃ and ℉.
Outdoor temperature display is not available for some
models. At that time, indoor unit receives " "
signal, while it displays indoor set temperature.
It
's defaulted to display set temperature when turning
on the unit. There is no display in the remote control-
ler.
Only for the models whose indoor unit has dual-8
display.
When selecting displaying of indoor or outdoor ambi-
ent temperature , indoor temperature indicator
displays corresponding temperature and automatical-
ly turn to display set temper
ature after three or five
seconds.
button
When selecting " " or no display with remote
controller, temperature indicator on indoor unit
displays set temperature.
When selecting " " with remote controller, tem-
perature indicator on indoor unit displays indoor
ambient temperature.
When selecting " " with remote controller,
temperature indicator on indoor unit displays
outdoor ambient temperature.
" " icon is displayed.
TEMP
button
By pressing this button, you can see indoor set tem-
perature, indoor ambient temperature or outdoor
LIGHT
again to exit turbo function and " " icon will
disappear.
Press this button to turn off display light on indoor
unit. " " icon on remote controller disappears.
Press this button again to turn on display light.
Under COOL or HEAT mode, press this button to
start up sleep function. " " icon is displayed on
remote controller. Press this button again to
cancel sleep function and " " icon will disappear.
Press "+" and "-" simultaneously to turn on or turn
off child lock function. When child lock function is
on, " " icon is displayed on remote controller. If
you operate the remote controller, the " " icon
will blink three times without sending signal t
o the
unit.
NOTE
Auto clean function
●
●
NOTE
The auto clean function can only work under normal
ambient temperature. If the
room is dusty, clean
air conditioner once a month; if not, clean air
conditioner once every three months. After the
auto clean function is turned on, you can leave the
room. When auto clean is finished, the air
conditioner will enter standby status.
This function is only available for some models.
Under unit off status, hold "MODE" and "FAN"
buttons simultaneously for 5s to turn on or turn off
the auto clean function. When the auto clean func-
tion is turned on, indoor unit displays "CL". During
the auto clean process of evaporator, the unit will
perform fast cooling or fast heating. There may be
some noise, which is the sound of flowing liquid or
thermal expansion or cold shrinkage. The air con-
ditioner may blow cool or warm air, which is a
normal phenomenon. During cleaning process,
please make sure the room is well ventilated to
avoid affecting the comfort.
10
Bekijk gratis de handleiding van Samsung AR24CRHGAWK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | AR24CRHGAWK |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 13575 MB |
