Handleiding
Je bekijkt pagina 21 van 58
21
English
Cleaning and Maintenance
Problem Solution
The product does not
work.
Error E116, E695, E698,
E699, E700
• This error occurs when the R-32 refrigerant sensor has a malfunction or the
sensor’s life has expired.
• The R-32 sensor’s lifespan is 10 years. The wired remote control displays
‘E699’ 6 months before the sensor’s lifespan expires. After the sensor's
lifespan expires, the wired remote control displays ‘E700’, and the product
usage is limited.
• Contact the Samsung Electronics service centre for assistance.
The air conditioner
does not operate
immediately after it
has been restarted.
• Because of the protective mechanism, the appliance does not start
operating immediately to keep the unit from overloading.
The air conditioner will start in 3 minutes.
The air conditioner does
not operate at all.
• Check if the power plug is properly connected.
• Check whether the auxiliary power switch (MCCB, ELB) is turned on.
• If the auxiliary power switch (MCCB, ELB) is turned off, the air conditioner
does not work although you press the (Power) button.
• When you clean the air conditioner or do not use it for an extended period
of time, turn off the auxiliary power switch (MCCB, ELB).
• After the air conditioner is not used for an extended period of time, be sure
to turn on the auxiliary power switch (MCCB, ELB) 6 hours before starting
operation.
NOTE
• The auxiliary power switch (MCCB, ELB) is sold separately.
• Make sure that auxiliary power switch (MCCB, ELB) is installed in the
distribution box inside the building.
• If the air conditioner is turned off by the Timed off function, turn on the air
conditioner again by pressing the (Power) button.
The temperature does
not change.
• Check whether the Fan mode is running. In the Fan mode, the air
conditioner controls the set temperature automatically, and you cannot
change the set temperature.
Warm air does not
come out of the air
conditioner.
• Check whether the outdoor unit is designed for cooling only. In this case,
warm air does not come out although you select the Heat mode.
• Check whether the remote control is designed only for cooling only. Use a
remote control that supports both cooling and heating.
The fan speed does not
change.
• Check whether the Auto or Dry mode is running. In these modes, the air
conditioner controls the fan speed automatically, and you cannot change
the fan speed.
Bekijk gratis de handleiding van Samsung AM015DNNDKG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | AM015DNNDKG |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 5349 MB |
