Handleiding
Je bekijkt pagina 27 van 44
27
Installation Procedure
English
conditioning performance reducing is possible.
Step 16 Setting the indoor unit option code
In order to set the indoor unit option code use the wired remote
controller and follow the directions below.
Main Menu Sub-menu
1 2 35 46
Data bit
1 2 3 45 6
Option Code
Page number
Option Code
SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
0
Page number
SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
1
Page number
SEG13 SEG14 SEG15 SEG16 SEG17 SEG18
2
Page number
SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
3
Page number
1 Press the and buttons at the same time for
more than 3 seconds and then a Main menu will be
displayed.
2 Press the / button to select and then press
button to enter a Sub-menu setting screen.
3 Press the
/ button to select and then press
button to enter a Indoor unit option code setting
screen.
NOTE
• The first digit represents the page number and the
remaining five digits are option codes.
• The option code which is currently setting will flicker.
4 Press the / button to set the option code in order.
Press button to go to the next page.
5 Press the
button to save and complete the option
setting.
6 Press the
button to exit to normal mode.
NOTE
• Press the
button anytime during setup to exit
without setting.
CAUTION
• Option code will not be applied if you don’t press the
• Setting indoor unit option code is only possible in
Master wired remote controller. You can only check
the indoor unit option code in Slave wired remote
controller.
• Setting indoor unit option code is possible when one
indoor unit is connected. If more than 2 indoor units
are connected, you can only check the Master indoor
unit option code.
Bekijk gratis de handleiding van Samsung AC024TNMPEC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | AC024TNMPEC |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 6881 MB |
