Sagitter J-TUBE X1 handleiding
Handleiding
Je bekijkt pagina 33 van 48
33
9. After the link procedure is finished, it is possible to control the tubes with the remote
controller, by setting 4 different groups:
a. When the LED 1 will be green fixed, it will be possible to control the tubes of
the group 1, with the functions described below
b. When the LED 2 will be green fixed, it will be possible to control the tubes of
the group 2, with the functions described below
c. When the LED 3 will be green fixed, it will be possible to control the tubes of
the group 3, with the functions described below
d. When the LED 4 will be green fixed, it will be possible to control the tubes of
the group 4, with the functions described below
10. After approximately 3 minutes of not use, the remote controller will automatically
switch OFF.
Description of the functions of the remote controller
: ON/OFF button
: group change
: DMX mode setting
: Auto mode setting
: Sound mode setting (not active)
: Strobe mode setting
: increasing / decreasing values
: direct setting of the colors Red (R), Green (G), Blue (B), Amber
(W), Mint (A). The (P) button is not active
: direct setting of the values
Bekijk gratis de handleiding van Sagitter J-TUBE X1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sagitter |
| Model | J-TUBE X1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7346 MB |
