Sage the Luxe Brewer SDC415 handleiding
Handleiding
Je bekijkt pagina 8 van 44
8
This Brewer has been designed to make any
style of coffee of the highest quality.
BREW
Brew up to 12 cups (1.8L) rapidly as the brewer
delivers water from the tank. For a bolder brew,
increase the amount of ground coffee used.
COLD BREW
Brew up to 8 cups (1.2 ml) of cold brew coffee
with the flexibility to adjust steeping time
between 0-24 hours.
KEEP WARM
(only applicable for BDC415)
After brewing, the machine will keep the coffee
warm.
CUSTOM
Brew up to 12 cups (1.8L) with precise control
over brew, water temperature, bloom volume,
bloom time, and water delivery speed.
Delayed Auto Start
Set the machine to automatically start brewing
at a preset time.
FILTER CHANGE
Changing the water filter depends on the water
hardness that the machine is using. For water
hardness level 1, it is recommended to change
the filter after 160 cycles.
DESCALE
After regular use, hard water can cause mineral
buildup in internal components, leading to
reduced brewing flow, brew temperature,
machine power, and coffee taste. It is
recommended to descale regularly.
CLOCK
Adjust the clock time after turning on the
machine.
SOUND
Once a setting is selected, the machine will
beep to confirm the changes. Adjust the volume
between LOW, Med, HIGH, and OFF.
BEFORE FIRST USE
NOTE
Hot brew coffee is made by using hot water
to ground coffee beans. Water temperature is
important in the brewing process as it affects
the rate of extraction. Extraction refers to the
flavours and substances dissolved from the
ground coffee. The hotter the water, the quicker
it is to extract compounds, such as oil, acids,
and caffeine.
Remove and discard all labels and packaging
materials attached to the machine. Make sure to
remove all parts and accessories from the box
before discarding the packaging.
Take a soft cloth and firmly wipe the exterior
stainless steel housing. Wash the lid, brew
basket, cone filter basket insert, mesh basket
filter, and carafe in warm, soapy water. Avoid
using abrasive cleansers, pads, or cloths
that can scratch the surface. Rinse and dry
everything thoroughly. Lastly, firmly press the
carafe drip stop to ensure it moves up and down
freely.
WATER HARDNESS SETTING &
FLUSHING
1. Ensure that the empty coffee basket and
empty carafe (with assembled lid) are inserted
into the machine.
2. Fill the water tank with fresh cold water up to
the Carafe Max mark. Plug the machine into
the power outlet.
3. Upon turning on the machine, the display
will show 'SET HARDNESS.' Dip the water
hardness test strip into a cup of the same water
from the tank for 1 second. Wait for one minute
to determine the water hardness level. Rotate
the SELECT dial to choose the water hardness
level based on the number of bars shown on
the strip, then press the dial. The machine will
beep to confirm the changes.
Assembly
Features
Bekijk gratis de handleiding van Sage the Luxe Brewer SDC415, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sage |
| Model | the Luxe Brewer SDC415 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6679 MB |
