Sage the Luxe Brewer SDC415 handleiding
Handleiding
Je bekijkt pagina 13 van 44
13
EN
USING DELAYED AUTO START
Here are the steps for setting up the machine to
automatically start brewing at a preset time:
1. Fill the water tank with fresh cold water
equal to the amount of coffee.
2. Grind the correct amount of whole bean
coffee. Use one scoop of ground coffee for
150 mL of water.
3. Select the appropriate filter basket and
paper filter.
4. Insert the filter basket into the brew basket,
using the alignment marks as a guide.
5. Put the paper filter into the filter basket, and
add the ground coffee.
NOTE
Never use both mesh basket filter and paper
filter at the same time.
6. Insert the brew basket into the machine.
7. Place the carafe with the lid into the machine.
8. Press the (icon here) DELAYED AUTO
START button. The LCD will display the
blinking hours setting.
9. Rotate the SELECT dial to set the desired
time to start the brewing cycle, then press
the dial to save the settings. The machine will
beep once to confirm the changes.
NOTE
If the clock hasn’t been set, the machine will
keep blinking after pressing the DELAYED
AUTO START button and won't beep to confirm
changes using the SELECT dial. Make sure the
clock is set before using the DELAYED AUTO
START function. The clock will reset every time
the unit is unplugged.
10. Rotate the SELECT dial to choose the
brewing mode, and the machine will
automatically start brewing at the set time.
NOTE
The LCD will display the set time until the
machine automatically starts brewing.
NOTE
Pressing the DELAYED AUTO START button
will cancel auto start.
Bekijk gratis de handleiding van Sage the Luxe Brewer SDC415, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sage |
| Model | the Luxe Brewer SDC415 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6679 MB |
