Sage the Luxe Brewer SDC415 handleiding
Handleiding
Je bekijkt pagina 12 van 44
12
6. Navigate to the COLD BREW setting and
press the dial once. The machine will then
begin brewing the water without the heating
element. Once this is complete a countdown
timer will display on the LCD indicating when
the Cold Brew is finished. At this point the
machine will automatically dispense the Cold
Brew into the waiting carafe.
NOTES
• Brew Time for Cold Brew can easily be
adjusted to your preference, anywhere
between 30 min – 24hrs.
• DO NOT add ice to the tank. Cold, chilled
water should be added.
• Ensure the carafe lid is removed for Cold
Brew mode.
HOW TO BREW USING SINGLE
CUP / SMALLER VOLUMES
(LESS THAN 4 CUPS, 500-600 ML)
NOTE
When brewing a single serve coffee on the
BDC415, the warming plate will not activate
for this size unless manually activated after
brewing.
1. The machine will recognize when the
brewer has 500-600mL of water and will
adjust the brew settings, automatically, to
make the best possible tasting coffee. Fill
your cup with fresh cold water and then pour
it into the water tank, ensuring the water
level stays below the single cup line.
1000
MIN
MAX
Single Serve
& Cold Brew
MAX
Carafe
mL
1500
1800
500
150
10
12
6
4
8
1
CUP
NOTES
• DO NOT fill the water tank more than single
cup line or the volume of the cup used to
receive the coffee. It will overflow as the
machine brews until the water tank becomes
empty. Brewing smaller volume coffee starts
at 500mL.
• When brewing single serve coffee the LCD
will display "REMOVE CARAFE LID". This is
to prevent the drip stop to engage, allowing
coffee to extract the full flavor for a single
serve. It will take about 4 minutes to brew
before the coffee pours into the cup.
2. The machine is designed to automatically
adjust the brew settings when it detects
500-600mL of water in the tank to ensure the
best tasting coffee. Fill your cup with fresh
cold water and then pour it into the water
tank, making sure the water level remains
below the single cup line.
3. Position your empty cup underneath the
brew basket outlet.
4. Grind the appropriate amount of whole bean
coffee to match the water level in the tank.
1 level scoop of ground coffee is suitable for
150ml of water.
NOTE
When brewing smaller volumes, use the cone
filter basket insert to ensure proper contact
between the brew water and the ground coffee.
5. Place the cone filter basket into the brew
basket using the alignment marks as a guide.
6. Insert a cone-shaped paper filter into the
cone filter basket, and then add the ground
coffee.
7. Insert the brew basket into the machine.
8. Turn the dial to select BREW mode.
9. Press the dial to start brewing.
10. Once the coffee is ready, the machine will
release steam and the LCD will display the
brewing modes menu.
Bekijk gratis de handleiding van Sage the Luxe Brewer SDC415, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sage |
| Model | the Luxe Brewer SDC415 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6679 MB |
