Sage the Kitchen Wizz 16 SFP810 Handleiding (160 Pagina's)

Handleiding

12

Timer

During operation the timer will count-up from

zero to display the accumulated processing time.

Continuous operation will stop if the timer reaches

20 minutes (19:59) and the unit will return to

standby mode.

To control the processing duration – press the up

or down arrows to set the timer for any recipe that

requires a specific length of time the ingredients

should be processed. Each single press will adjust

by 5 seconds, holding the button will adjust in

10 second increments. The TIMER icon will be

displayed on the screen.

Press PLAY | PAUSE to initiate processing and

the unit will operate as the displayed time counts

down. The motor will run continuously until the

timer reaches zero. Removing the large pusher or

using the pause function will not affect the set time

during processing. Pressing POWER or PULSE

buttons during operation will clear the timer and

return to standby.

After Processing

Wait until the blades or discs have stopped

moving before unlocking the lid. Ensure that the

unit has been turned off using the POWER button

and unplug at the power outlet before handling

the blades.

When removing the blades or discs, lift the part by

carefully gripping the plastic hub area in the center.

Overload Protection System

The food processor has an overload protection

system to prevent damage to the motor – this will

cause the food processor to go into standby mode

and the OVERLOAD PROTECTION icon will flash.

Unplug the food processor and allow to cool for

30 minutes.

If the blades or discs stall while processing,

immediately stop the machine, then unplug

from the power outlet before clearing the wedge

ingredients. If this happens more than once, the

bowl may be overloaded. Try processing in

smaller batches.

Bekijk gratis de handleiding van Sage the Kitchen Wizz 16 SFP810, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.