Handleiding
Je bekijkt pagina 34 van 41
GB GB
65
64
Before installing the hob
- The work surface is square and level, and no structural members
interfere with space requirements.
- The work surface is made of a heat-resistant material.
- If the hob is installed above an oven, the oven has a built-in
cooling fan.
- The installation will comply with all clearance requirements and
applicable standards and regulations.
- A suitable isolating switch providing full disconnection from the
mains power supply is incorporated in the permanent wiring,
mounted and positioned to comply with the local wiring rules
and regulations.
- The isolating switch must be of an approved type and provide a
3 mm air gap contact separation in all poles (or in all active
[phase] conductors if the local wiring rules allow for this
variation of the requirements).
- The isolating switch will be easily accessible to the customer
with the hob installed.
- You consult local building authorities and by-laws if in doubt
regarding installation.
- You use heat-resistant and easy-to-clean finishes (such as
ceramic tiles) for the wall surfaces surrounding the hob.
- Lower part of induction cooker ambry must install the product
such as oven,or close with board.
After installing the hob
- The power supply cable is not accessible through cupboard
doors or drawers.
- There is adequate flow of air from outside the cabinetry to the
base of the hob.
- If the hob is installed above a drawer or cupboard space, a
thermal protection barrier is installed below the base of the
hob.
- The isolating switch is easily accessible by the customer.
Before locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the
packaging). Do not apply force onto the controls protruding from
the hob.
Locating the fixing brackets
Fixing the hob on the work surface by screw four bracket on the
bottom of hob (see picture) after installation.
Adjust the bracket position to suit for different work surface
thickness.
Bekijk gratis de handleiding van Saba TI72001FLX25/A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Saba |
| Model | TI72001FLX25/A |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5355 MB |
