Handleiding
Je bekijkt pagina 31 van 41
GB GB
If the timer is set on more than one zone
1. When you set timer for several cooking zones, red dots
of the relevant cooking zones are indicated. The timer
display shows the min. timer. The dot of the
corresponding zone blinks.
2. Once the countdown timer expires, the corresponding
zone will switch off. Then it will show the new min. tier
and the dot of corresponding zone will flash.
NOTE: touch the heating zone selection control, the
corresponding time will be shown in the timer indicator.
(réglé sur 15 minutes)
(réglé sur 30 minutes)
Cancelling the timer
1. Touch the heating zone selection control that you
want to cancel the timer.
2. Touch the timer control, the indicator will flash.
3. Touch the power selection control to set the timer to
’00’ , the timer is cancelled.
Using the Flexible zone function
1. This may be used as a single zone or two individual zones
depending on the cooking needs in each situation.
2. It is made of two independent inductors that can be controlled
separately. When the flexible zone is working, only the zone
covered by the cookware is activated.
3. To ensure that the cookware is detected and heat is distributed
evenly, correctly centre the cookware.
4. One hob with more than one flexible zone, it is not
recommended to use several zones at the same time for a single
pan.
5. Make sure to place the cookwares centered on the single cooking
zone. The ideal recipe is an oval or rectangular saucepan,or a
saucepan.
59
58
Bekijk gratis de handleiding van Saba TI72001FLX25/A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Saba |
| Model | TI72001FLX25/A |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5355 MB |
