Handleiding
Je bekijkt pagina 30 van 41
GB GB
Using the timer as a Minute Reminder
1. Make sure the cooktop is turned on. And zone
selection key is not activated (zone indication ‘ ’ is not
blinking).
Note: you can set minute minder after cooking zone
power setting finished.
2. Touch timer key, ‘10’ will show in the timer display
and ‘0’ will flash.
3. Set the time by touching the ‘slider’ control of timer.
4. Touch timer control again, then ‘1’ will flash.
5. Set the time by touching the ‘slider’ control.
6. When the timer is set, it will begin to count down
immediately. The display will show the remaining time.
7. Buzzer will beep for 30 seconds and the timer indicator
shows ‘- -’ when the setting time finished.
Using the timer to switch off one or more cooking zones
1. Touching the heating zone selection control that you want to
set the time.
2. Touch timer control, the ‘10’ will show in the timer display,
and the ‘0’ flashes. Zone indication “ “ is blinking.
3. Set the time by touching the ‘slider’ control.
4. Touch timer control again, the ‘1’ will flash.
5. Set the time by touching the ‘slider’ control.
6. When the time is set, it will begin to count down immediately.
The display will show the remaining time.
NOTE: there will be a red dot in the right bottom corner of
power level indication which indicating that zone is selected.
7. When cooking timer expires, the corresponding cooking zone
will be switched off automatically.
NOTE: other cooking zones will keep operating if they are
turned on previously.
57
56
Bekijk gratis de handleiding van Saba TI72001FLX25/A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Saba |
| Model | TI72001FLX25/A |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5355 MB |
