Handleiding
Je bekijkt pagina 41 van 43
79
78
Fan noise
coming from
the induction
hob.
A cooling fan built
into your induction
hob has come on to
prevent the
electronics from
overheating. It may
continue to run
even after you have
turned the
induction hob off.
This is normal and needs
no action.
Do not switch the power
to the induction hob off
at the wall while the fan
is running.
Pans do not
become hot
and appear in
the display.
The induction hob
cannot detect the
pan because it is
not suitable for
induction cooking.
The induction hob
cannot detect the
pan because it is
too small for the
cooking zone or not
properly centered
on it.
Use cookware suitable for
induction cooking. See
section "Choosing the right
cookware".
Centre the pan and make
sure that its base matches
the size of the cooking zone.
Techni
The induction
hob or a
cooking zone
has turned itself
off
unexpectedly, a
tone sounds or
an error code is
displayed.
cal fault. Please note down the letters
and numbers, switch the
power to the induction hob
off at the wall, and contact a
qualified technician.
If an abnormality comes up, the induction hob will enter the protective
state automatically and display corresponding protective codes:
FAILURE DISPLAY AND INSPECTION
Problem Possible cause What to do
Replace the pot
E1/E2
Please inspect whether power
supply is normal. Power on
after the power supply is
normal.
F3/F4
No pot or pot not
suitable.
Temperature sensor
of the induction coil
failure
Please contact the after-
sales service.
F9/FA
Temperature
sensor of the IGBT
failure
Abnormal supply
voltage
Please contact the after-
sales service.
E3
High temperature
of the induction
coil temperature
sensor
Please contact the after-sales
service.
E5
High temperature of
the IGBT
temperature sensor
Please restart after the
hob cools down.
The above are the judgment and inspectionof common failures.
Please do not disassemble the unit by yourself to avoid any dangers
and damages to the induction hob.
TI70STD444SLB23Model identification
Cooking Zones
4 Zones
220-240V~/380-415V~
Installed Electric Power
6600-7400W
Product Size D x W x H (mm) 700×520×60
Building-in Dimensions AxB (mm)
Supply Voltage
560×490
TECHNICAL SPECIFICATION
GB GB
Bekijk gratis de handleiding van Saba TI70STD444SLB23, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Saba |
| Model | TI70STD444SLB23 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 6036 MB |
