Handleiding
Je bekijkt pagina 40 van 43
GB
77
76
Boilovers,
melts, and
hot sugary
spills on the
glass
.Remove stains left by melts
and sugary food or
spillovers as soon
as possible. If left to cool on
the glass, they may be
difficult to remove or even
permanently damage
Remove these
immediately with a fish
slice, palette knife or
razor blade scraper
suitable for induction
glass cooktops,but
beware of hot cooking
zone surfaces:
1. Switch the power to
cooktop off at the wall.
2. Hold the blade or
utensil at a 30°angle
and scrape the soiling
or spill to a cool area
of the cooktop.
3. Clean the soiling or spill
up with a dish cloth or
paper towel.
4. Follow steps 2 to 4 for
"Everyday soiling on
glass" above.
the glass surface.
.Cut hazard:when the safety
cover is retrated,the blade
in a scraper is razor-sharp.
Use with extreme care and
always store safely and out
of reach of children.
Spillovers
on the
touch
control
·The cooktop may beep
and turn itself off, and the
touch controls may not
function while there is
liquid on them. Make sure
you wipe the touch
control area dry before
turning the cooktop back
1. Switch the power to
the cooktop off .
2. Soak up the spill.
3. Wipe the touch
control area with a
clean damp sponge
or cloth.
4. Wipe the area
completely dry with
a paper towel.
5. Switch the power to
the cooktop back on.
on.
. Never leave cleaning
residue on the cooktop:
the glass may become
stained.
TROUBLESHOOTING
Problem
Possible causes What to do
No power.
The
cooktop
cannot be
turned on.
Make sure the cooktop is
connected to the power
supply and that it is
switched on.
Check whether there is a
power outage in your
home or area. If you have
checked everything and
the problem persists, call a
qualified technician.
The controls
are
The touch
controls are
unresponsive.
locked.
Unlock the controls. See
section "Using the hob"
for instructions.
The touch
controls are
difficult to
operate.
There may be a
slight film of water
over the controls or
you may be using
the tip of your finger
when touching the
controls.
Make sure the touch control
area is dry and use the ball
of your finger when
touching the controls.
Use cookware with flat and
smooth bases. See "
Choosing the right
cookware".
See "Maintenance and
The glass is
Rough-edge
cookware.
Unsuitable, abrasive
being scratched.
scourer or cleaning
products being
used.
cleaning"
Some pans
make crackling
or clicking
noises.
This may be caused
by the construction
of your cookware
(layers of different
metals vibrating
differently).
This is normal for cookware
and does not indicate a fault.
This is caused by
the technology of
induction cooking.
The induction
hob makes a
low humming
noise when
used on a high
heat setting.
This is normal, but the
noise should quieten down
or disappear completely
when you decrease the
heat setting.
GB
Bekijk gratis de handleiding van Saba TI70STD444SLB23, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Saba |
| Model | TI70STD444SLB23 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 6036 MB |
