Handleiding
Je bekijkt pagina 38 van 43
GB GB
Using the flexible zone function
1. This may be used as a single zone or two two individual zones
depening on the cooking needs in each situation.
2. It is made of two independent inductors that can be controlled
separately. When the flexible zone is working, only the zone
covered by the cookware is activated.
3. Important: Make sure to place the cookwares centered on the
single cooking zone.In case of big pot,oval,rectangular and
elongated pans make sure to place the pans centered on the
cooking zone covering both cross.
Examples for good and bat pot placements.
At big zone
1. Touch the slide along the slider control,or just touch any point
of the slider to adjust the power level and then press the flex
zone button,the indicator will show to activate the
flexible area as a single big zone.
At two independent zones
1. If you want to cancel the flex zone,just touch slide along the
slider control,then press the flex zone button,the indicator
next to the flex zone button will disappear.
Auto shutdown protection
Auto shutdown is a safety protection function for your induction
hob. This occurs whenever you forgetto switch off a cooking
zone. The default shutdown times are shown in the table below:
Power level
When the pot is removed, the induction hob can stop heating
immediately and the hob automatically switch off after 1 minute.
1
Default working
timer(hour)
2
8 8 8 4 4 4 2 2 2
2
A
2
II
3
5
4
6
7
9
8
73
72
Bekijk gratis de handleiding van Saba TI70STD444SLB23, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Saba |
| Model | TI70STD444SLB23 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 6036 MB |
