Handleiding
Je bekijkt pagina 37 van 43
GB GB
2. Touching the "-" or "+" of timer control,the reminder indicator
will start flashing and "30" will show in the timer display.
3. To cancel the timer,touch the slider of the selection control,
and then touch the "-" or "+" of timer,then scrolling down
to "0",the timer is cancelled,the "00" will show in the minute
display,and then "--".
5. When the timer is set, it will begin to count down immediately.
The display will show the remaining time.
Note:there will be a red dot in the right bottom corner of
power level indication which indicating that zone is selected.
6. When cooking timer expires, the corresponding cooking zone
will be switched off automatically.
Using the timer to turn more than one cooking zone off
1. If use this function to more than one heating zone,the
timer indicator will show the shortest time.
(e.g. zone 1 setting time of 2 minutes, zone 2 setting
time of 5 minutes,the timer indicator show "2".)
NOTE: The flashing red dot next to power level in indicator
means the timer indicator is showing time of the heating
zone.
If you want to check the set time of other zone,touch
the heating zone slider control one time.The timer will
indicate its set time.
2. When cooking timer expires,the corresponding
heating zone will be automatically switch off the show "H" .
NOTE:If you want to change the timer after the timer is set,you
have to start from step 1.
NOTE: other cooking zones will keep operating if they are
turned on previously.
And then set the timer by touching the "-" or "+" control.
71
70
Bekijk gratis de handleiding van Saba TI70STD444SLB23, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Saba |
| Model | TI70STD444SLB23 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 6036 MB |
