RTS KP-3016A handleiding
Handleiding
Je bekijkt pagina 16 van 162
16 Installation KP-3016/3016A Series
KP-3016/KP-3016A Installation
IMPORTANT: If you plan to use the Power Supply Mounting Bracket, we recommend you install the mounting bracket before
cabling the keypanel. For information on different power supply mounting options, see “Power Supply Mounting” on
page 155.
IMPORTANT: When the OEI-2 power supply is used on a KP-3016/3016A keypanel, the following warning blinks to indicate the
wrong power supply being used. The OEI-2 uses less voltage than the keypanel, therefore, when the power supply for
the OEI-2 is used on a keypanel, degraded audio may be heard. No damage to the keypanel occurs.
To install the KP-3016/3016A, do the following:
1. On the rear panel of the KP-3016/3016A, plug the 24 VDC power connector (A) of the power supply into the power connector on
the back panel of the unit.
2. Connect an RJ-12 or RJ-45 (568B or USOC) cable (B) with RTS cabling to the J8 FRAME connector on the rear panel.
OR
Connect an CAT-5e cable (C) to the J11 ETHERNET connector on the rear panel (only available for the KP-3016)
3. Once the unit is cabled, plug the power supply power cord into the wall outlet or a power strip.
FIGURE 4. KP-3016/3016A Installation
Bekijk gratis de handleiding van RTS KP-3016A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | RTS |
| Model | KP-3016A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 29679 MB |
